Use this page to find the load, speed, current, and force graphs published for FIRGELLI actuator families. Each graph describes the product and options named with it, so match the voltage and force configuration before reading a value.
Replacing or cross-referencing an actuator? Use the linear actuator replacement guide to compare published specs and shortlist FIRGELLI replacement options.
Available graphs: 64 curve images across 30 FIRGELLI product-family pages, last checked August 16, 2026. Each row below links to the product page where the graph is published.
Before using a graph: confirm the product family, voltage, force option, axes, units, and legend. A graph for one configuration should not be used for another.
What these graphs are for: use them to compare the operating relationship shown for the named actuator family. They do not predict wear or service life, and some graphs do not include the complete test setup or raw data behind the image.
How to use an actuator performance curve
- Match the exact product family, voltage, force option, and any other option named on the graph.
- Use the expected operating load, not only the unloaded condition.
- Read speed and current from the graph tied to that configuration.
- Check stroke, installed length, duty cycle, mounting, environment, feedback, controller, and power requirements separately.
- Apply an engineering margin appropriate to the mechanism and validate the complete system under representative conditions.
The current product page, specification sheet, drawing, and option-specific documentation take precedence if any source conflicts with a general explanation.
What the published curve types show
- Speed versus load: the product-family graph relates loaded travel speed to applied load for the configurations identified on that graph.
- Current versus load: the graph relates electrical current to applied load for the stated voltage and product option.
- Force or performance graph: the graph may compare product options or summarize another operating relationship. Read its axes, units, legend, and option labels before using it.
Representative FIRGELLI product curves
These are existing FIRGELLI product-family graphs, shown here as examples of the source material indexed below. Open the linked product page before reading an exact value.
Super Duty actuator speed and current curves
Heavy Duty IP66 actuator current versus load
Bullet 50 Cal actuator speed versus load
Feedback Rod actuator current versus load
Product-family source index
Every row links to the current product page that publishes the graph. The labels below match the product-page labels; numerical values have not been estimated from image pixels.
What a performance graph does not tell you
A load, speed, current, or force graph does not tell you how long the actuator will last. Life also depends on duty cycle, temperature, mounting alignment, side load, shock, contamination, and the motion profile.
If your design depends on repeatability, backlash, noise, corrosion resistance, ingress protection, or cycle life, check the exact product documentation or confirm the requirement with FIRGELLI before selecting the actuator.
How to document your own actuator test
If you test an actuator in your mechanism, record the items below. They make the result repeatable and help explain why a bench test may differ from the published graph.
- Exact product, SKU, voltage, force option, stroke, revision, and controller
- Sample size plus serial, lot, or specimen traceability
- Test purpose, procedure, acceptance criteria, and operating sequence
- Fixtures, mounting orientation, alignment, and load application
- Power-supply voltage, tolerance, current limit, and wiring
- Ambient temperature, humidity, and other relevant environmental conditions
- Instrumentation, calibration status, sampling rate, and units
- Raw data, processing steps, excluded points, and measurement uncertainty
- Results, limitations, reviewer, review date, and revision history
Related engineering path
- Actuator Engineering Academy for the full learning and selection path.
- Engineering Library for calculators, mechanisms, and technical articles.
- Electric actuator dynamic force calculator for a requirements calculation with stated assumptions.
- Linear actuator product families for current model specifications and source graphs.
- Product manuals, specification sheets, drawings, and 3D files for model-specific documentation.
Frequently asked questions
Are these curves certified test reports?
No. They are product-family engineering graphs. Use them to compare the operating behavior shown on the axes, and use the exact product documentation when a selection depends on a certified value or test standard.
Can I use a curve from one actuator family for another family?
No. Motor, gear ratio, screw pitch, voltage, force option, controller, and construction can change the relationship between load, speed, and current. Use only the graph tied to the exact product family and option.
Why can actuator speed and current change with load?
As load increases, the motor has to produce more torque. Current normally rises and speed normally falls, although the amount depends on the motor, gearing, screw, voltage, and controller used in that actuator.
Is the raw numerical test data available?
Not for every graph. Where only an image is available, use it as a visual operating reference and contact FIRGELLI if your design needs a value that cannot be read clearly from the published graph.
Does a load or current curve prove actuator service life?
No. Service life also depends on duty cycle, temperature, mounting alignment, shock, side load, contamination, and how closely the actuator stays within its ratings.
What should a complete future test record include?
Record the exact actuator and options, power supply, mounting, applied load, ambient conditions, instruments, test sequence, sample count, raw readings, and any processing used. Those details make the result repeatable and easier to compare with another test.
Author and review process
Prepared by Robbie Dickson, founder of FIRGELLI Automations. The graph links and product-family labels were checked against the current FIRGELLI product pages. Numerical points were not estimated from the graph images.
Last reviewed: August 16, 2026. Version: 1.0.
Reference: NIST Special Publication 811 for SI units, symbols, and unit-conversion guidance.