Watch Stop: Hacking-lever Illustration and Timing Conversion

← Back to Engineering Library

A watch stop or hacking mechanism moves a stop lever into contact with the balance when the stem enters the hand-setting position, immobilizing the oscillator so the hands can be synchronized. This calculator is a timing and entered-value calculation only.

Watch Stop Interactive Calculator

Enter beat rate, displayed amplitude, two force references and a restart-count reference. Outputs are conversions and entered-value differences—not stopping force, restart performance, damage risk or service limits.

0°

Full-oscillation frequency
--
Full-oscillation period
--
Count × period reference
--
Entered force-reference span
--

Equation Used

full oscillation frequency=VPH/7200; period=1/f; entered restart-duration reference=N period; entered force-reference span=max(F1,F2)−min(F1,F2).
VPH is treated as half-oscillations per hour, so two vibrations make one full balance oscillation. The restart and force values are calculation references only; no contact, friction, elasticity or movement dynamics are solved.
  • VPH counts half-oscillations and is divided by 7200 for full oscillations per second.
  • Amplitude is entered for visual context and does not alter the timing conversion.
  • Restart count is an entered reference multiplied by ideal oscillation period; it is not a restart prediction.
  • Force references are entered independently and only their ordered difference is reported.
  • Lever geometry, stem/cam travel, contact location, friction, spring stiffness, balance inertia, escapement torque, rebound, wear, damage, tolerances and movement-specific service limits are omitted.
Related Video: Automatic-watch Winding
Video: The Automatic Watch Beginner's Guide - How To Wind An Automatic Watch by Timed Square on YouTube. Used here to complement the diagram below.
Same mechanism and inputs as the interactive calculator.

Stem-Actuated Balance Stop

U.S. Patent 3,765,164 describes a hand-setting stem position causing a spring-lever stop portion to halt the balance wheel, a feature also called hacking. EP 4,296,793 describes a user-controlled stop lever moving between released and supporting/contact positions.

What This Calculator Represents

The tool converts VPH to full-oscillation frequency and period, multiplies period by an entered count, and subtracts two entered force references. It does not model the stop event.

Timing and Entered-Value calculation

f=VPH/7200
T=1/f
count-duration=N T
force-reference span=max(F1,F2)−min(F1,F2)

Amplitude is displayed but does not enter these conversions.

Worked Arithmetic Example

At 28,800 vph, full-oscillation frequency is 4 Hz and period is 0.250 s. An entered count of two corresponds to a 0.500 s timing reference. Entered force references 0.5 and 2.0 mN have a span of 1.5 mN; that span is not an acceptable-force specification.

Assumptions and Limits

  • Calculated: beat-rate conversions, count-times-period and an entered-force difference.
  • Illustrated: generic balance wheel, pivoted stop lever and released/contact states.
  • Not calculated: actual stopping or restart time, force, contact stress, friction, rebound, rate effects, damage, reliability or service procedure.

Frequently Asked Questions

Does the calculator predict how fast a watch restarts?

No; it only multiplies an entered count by ideal period.

Is the force span a safe working window?

No; both endpoints are user-entered references.

Does amplitude affect the outputs?

No; it is visual context only.

Does the animation prove contact geometry?

No; it is a generic topology cue.

Can this diagnose a movement?

No.

Should it guide watch service or modification?

No; use movement documentation and qualified watchmaking practice.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: