Pin-Geared Watch Stop: Declared Stop-Work Indexing

← Back to Engineering Library

This revision corrects the subject from a balance-wheel hacking lever to historical mainspring winding stop-work and uses a transparent declared indexing model.

Pin-Geared Stop-Work Indexing Explorer

Choose a declared number of stop-wheel stations, permitted advances and driver turns. The worksheet reports ideal index angles and remaining declared range without predicting mainspring torque or adjustment.

0°

Index angle per turn
--
Indexed angle used
--
Declared turns remaining
--
Declared range used
--

Equation Used

step=360/P; index=U step; remaining=A-U
P, A and U define an educational indexing model. They are not dimensions or settings for a particular watch movement.
  • Stop-wheel stations are equally spaced.
  • One displayed driver turn advances the stop wheel by one station.
  • Permitted advances A are less than station count P.
  • Driver turns U are clamped to the declared permitted range.
  • Tooth profile, backlash, mainspring torque, friction, elasticity, tolerances, assembly and servicing are excluded.

Corrects a subject-level error: this is mainspring winding stop-work, not a hacking-seconds balance brake.

A winding pin advances a stop wheel

Hiscox lists the pin-geared watch stop among watch stop-work mechanisms, not balance-wheel hacking devices. US patent 581,504 describes a winding wheel carrying a stop pin that acts on a toothed stop wheel; continued winding brings a beveled stop finger into engagement with a stop-wheel spring so rotation ceases.

The animation is a declared, schematic index sequence rather than a reconstructed movement.

Historical mainspring stop-work

Historical watchmaking references describe stop-work as limiting the usable mainspring turns so the movement avoids the extreme ends of the spring's torque range. The related Geneva stop uses a finger and slotted wheel for the same broad purpose.

This page explains the principle and does not provide restoration or adjustment instructions.

A declared indexing model

step=360/P; index=U step

P equally spaced declared stations give 360/P degrees per index. If one driver turn advances one station, U turns use U times that angle and A-U declared turns remain.

The model does not calculate mainspring torque, power reserve or rate performance.

A declared six-station example

With six declared stations, each advance is 60 degrees. Four permitted advances span 240 degrees of stop-wheel indexing; after two driver turns, two declared turns remain.

Index counting is not watch adjustment

The former page misidentified this mechanism as a modern hacking-seconds balance brake and attached unsupported millisecond timing, brand, force, tolerance, repair and performance claims. Those claims are removed.

Pin-geared watch-stop questions

Does this stop the balance wheel for time setting?

No. The historical subject is mainspring winding stop-work.

Are the station counts a restoration specification?

No. They are declared educational inputs.

Does the model predict power reserve?

No.

Pin-geared watch-stop references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: