A current-driven wheel extracts part of the kinetic-energy flux through a represented area. This calculator applies an entered power coefficient and tip-speed ratio; it does not predict either coefficient, the velocity field or the loaded operating point.
Water Wheel Form 4 Interactive Calculator
Enter undisturbed flow speed, represented capture area, assumed power coefficient, assumed tip-speed ratio and wheel diameter. Outputs are ideal scenario conversions, not a device performance prediction.
Equation Used
- Water density is 1000 kg/m3.
- Velocity is uniform and normal across the entered represented area.
- Power coefficient and tip-speed ratio are entered constants.
- Wheel diameter converts assumed tip speed to RPM.
- Blockage, free-surface effects, depth, shear, turbulence, supports, drivetrain, controls, cavitation and structural loads are omitted.
Hydrokinetic Power Across the Entered Area
An U.S. DOE ARPA-E hydrokinetic metric uses the same 0.5 rho A Cp v-cubed relationship. An NREL reference-turbine report defines power coefficient relative to kinetic power flux.
What This Calculator Represents
The tool evaluates one uniform-flow area and two entered performance coefficients.
Kinetic Power and Assumed Tip-Speed Ratio
P_i=Cp P_s
u_tip=lambda v
N=60u_tip/(pi D)
tau_i=P_i/omega
Cp and lambda are inputs, not predictions.
Worked Scenario
At 1.5 m/s, 1 m2 represented area, Cp=0.20, lambda=0.40 and D=1.91 m, represented stream power is about 1,688 W, illustrative extracted power 338 W, assumed-TSR speed 6.0 rpm and torque about 537 N m.
Model Boundary
- Calculated: uniform-flow kinetic flux and conversions from entered Cp/lambda.
- Illustrated: current wheel, flow corridor and power readouts.
- Not calculated: Cp/lambda curves, blockage, free surface, wake, losses, controls, depth or structure.
Frequently Asked Questions
Is Cp predicted?
No.
Is tip-speed ratio optimized?
No; it is entered.
Must velocity be undisturbed?
Yes for the stated represented-area scenario.
Does area include blockage?
No.
Is torque guaranteed?
No; it is an ideal quotient at the assumed speed.
Can this size a real installation?
No.
References
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.