Undershot Paddle Wheel: Declared Radial-Paddle Layout

← Back to Engineering Library

An undershot water wheel receives flowing water at its lower paddles. Explore its circular layout and calculate circumference, paddle spacing, rim arc pitch and the area of one rectangular paddle face. These dimensions do not determine water force or shaft power.

Undershot-Wheel Layout Calculator

Enter wheel diameter, equal paddle count, paddle radial depth and wheel width. The worksheet reports exact layout identities only.

0°

Ideal wheel circumference
--
Equal angular spacing
--
Rim arc pitch
--
One paddle face area
--

Equation Used

C=pi D; spacing=360/N; pitch=pi D/N; Ap=bh
N is rounded to a whole number. Paddle area is one declared rectangular face; water and rotation are qualitative.
  • The wheel is a perfect circle of declared diameter D.
  • N identical paddles are equally spaced and rotate rigidly with the wheel.
  • Each declared paddle face is a rectangle of width b and radial depth h.
  • Immersion, flow, drag, blade interaction, losses, torque, power, speed, load, structure and safety are excluded.

Diameter and paddle count change the wheel drawing. Paddle width and depth determine the numerical face area; the paddle shapes and moving water markers remain illustrative.

Flow pushes flat blades at the bottom of the wheel

National Park Service documentation distinguishes the undershot wheel by water delivered to its bottom: flowing water pushes flat blades and turns the wheel. A National Register history likewise records river current turning paddles that dip into the water.

The animation keeps the hub, rim, spokes and paddles in one rigid rotating assembly. The waterline and moving markers identify the topology only.

Historical stream and mill use

NPS records document undershot wheels at historic mills and explain that they did not require the elevated supply used by an overshot arrangement. Site conditions and surviving evidence vary.

This page does not evaluate a water resource, choose a wheel, or design a power system.

Declared wheel-and-paddle geometry

C=pi D; angular spacing=360/N; rim arc pitch=pi D/N; Ap=bh

These are circle, equal-spacing and rectangle identities. They do not represent hydraulic performance.

Declared layout example

For D=2.0 m and N=8, circumference is 6.283 m, equal angular spacing is 45.00 degrees and rim arc pitch is 0.785 m. A b=0.9 m by h=0.3 m paddle face has area 0.270 m2.

What layout geometry cannot determine

Actual behavior depends on water delivery, immersion, relative blade-water motion, blade interaction, channel geometry, losses, load and detailed construction.

Estimating useful output requires water conditions and a model of the moving paddles, their interaction and mechanical losses. Paddle dimensions and spacing alone do not provide that estimate.

Undershot-wheel questions

Does paddle area predict drag?

No.

Does arc pitch predict efficiency?

No.

Is the water animation a flow simulation?

No.

Does phase represent RPM?

No.

Can this calculator size a shaft or generator?

No.

Undershot-wheel references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: