Water Wheel Form 7: Retained-water Static Moment

← Back to Engineering Library

A retained mass produces a gravitational moment about a wheel axle according to its radius and angular position. This calculator evaluates that single static moment, then applies entered efficiency and chosen speed as an illustrative operating-point conversion.

Water Wheel Form 7 Interactive Calculator

Enter retained water mass, radius, working angle, assumed efficiency and chosen RPM. Results describe one static mass moment—not bucket filling, continuous flow or a real wheel operating point.

0°

Entered-mass weight
--
Static gravitational moment
--
Efficiency-scaled moment
--
Chosen-speed power product
--

Equation Used

weight=mg; static moment=mg r sin(theta); illustrative shaft torque=eta mg r sin(theta); illustrative power=tau(2 pi n/60).
The entered mass is treated as a lumped load at one radius and angle. It is not derived from flow or bucket volume and is not replenished through a cycle. Efficiency and RPM are independent scenario inputs.
  • The entered water mass is a point-equivalent retained load.
  • Radius and angle locate that load for one static moment.
  • Efficiency and RPM are entered independently.
  • No flow rate, filling, emptying, counteracting bucket mass or cyclic averaging is modeled.
  • Hydraulics, losses, control, structure, fatigue and safety limits are omitted.
Same mechanism and inputs as the interactive calculator.

Retained-Mass Static Moment

The DOE Microhydropower Handbook treats real hydropower from flow and head. This narrower calculator instead applies the elementary moment of a specified weight about an axle; it does not calculate a hydraulic resource.

What This Calculator Represents

The tool places one entered retained mass at one radius and angle, scales its static moment by an entered percentage, and multiplies by chosen angular speed.

Static-Moment Scenario

W=mg
tau_s=mg r sin(theta)
tau_i=eta tau_s
P_i=tau_i omega

The last product is not cycle-averaged wheel power.

Worked Static Scenario

For 120 kg at 2 m and 60 degrees, weight is about 1,177 N and static moment about 2,039 N m. At 70% entered scaling, illustrative torque is about 1,427 N m; multiplied by chosen 6 rpm, the instantaneous product is about 0.90 kW.

Assumptions and Limits

  • Calculated: one weight, one static moment, entered scaling and chosen-speed product.
  • Illustrated: retained load location, radius and moment arm.
  • Not calculated: flow/head power, bucket inventory, cycle average, actual speed, losses, governing or structure.

Frequently Asked Questions

Is water mass derived from flow?

No.

Is this torque constant through a revolution?

No; it is one entered-angle moment.

Is efficiency predicted?

No.

Is RPM solved?

No.

Is power cycle averaged?

No.

Can this size a wheel?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: