Spiral Stop-motion Gear Mechanism: How It Works, Diagram, Formula and Indexing Uses Explained

← Back to Engineering Library

This partial calculator converts selected position count, cycle share and cycle time into schedule arithmetic. It does not reconstruct Hiscox movement 956, the cited rack mechanism, or any index-and-lock geometry.

Partial · Selected Cycle-Schedule Ledger

Convert selected cycle values without claiming an index, engagement or lock mechanism.

0°

Selected Equal Sector
--
Selected Active Time
--
Remaining Cycle Share
--
Remaining Cycle Time
--

Equation Used

sector=360/N; active=Tq/100; remaining share=100-q; remaining time=T-active.
Selected schedule arithmetic only; no stop-motion topology, contact, indexing or locking model.
  • N is a selected count only.
  • Active share is user-selected and not derived from geometry.
  • Contact, index, lock, clearance, load and safety are excluded.

The figure is a schedule dial, not a stop-motion gear.

Watch the Spiral Stop-motion Gear in motion
Video: Gear rack drive for linear reciprocating motion 2 by Nguyen Duc Thang (thang010146) on YouTube. Used here to complement the diagram below.
Same mechanism and inputs as the interactive calculator.

Supported selected schedule arithmetic

Selected sector size is 360/N, active time is cycle time times selected active share, remaining share is 100 minus active share and remaining time is cycle time minus active time.

Use and boundary

Use as an abstract cycle schedule only, not as an engagement, index or dwell prediction.

Schedule identities

sector=360/N; active time=Tq/100; remainder=100-q; remaining time=T-active time.

Default example

For N=8, q=21% and T=4 s, selected sector is 45 degrees, active time is 0.84 s and remaining time is 3.16 s.

Unsupported mechanism claims removed

Follower indexing, spiral-tooth engagement and locking-pocket dwell were removed because the cited sources do not define that geometry.

Questions

Is active share an engagement prediction?

No. It is a selected schedule percentage.

Does N define a follower wheel?

No.

References

References & Further Reading

  • Wikipedia contributors. Intermittent mechanism. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: