A spherical globoid spiral carries a screw-like path around a convex body. A mating pinion is supported on an arm that can swing about the body’s centre. Hiscox illustrates this arrangement as “Globoid Spiral Gear Wheels.” Reuleaux describes how a sphere and an evenly advancing radius generate the spiral. The interactive view shows a one-start spherical screw engaging a pinion on a movable arm.
Globoid Spiral Gear Wheels Interactive Calculator
Watch the spherical spiral drive the pinion while its arm is held at the selected angle. Change input speed, pinion tooth count, arm angle and the sphere’s reference radius. The shaded thread and wheel make their motion visible. Tooth shapes are illustrative; the calculator gives ideal pitch and speed relationships.
Equation Used
The example has one spiral start and 32 equal meridional pitch intervals per complete great circle. N is pinion tooth count, R is sphere pitch radius, r is pinion pitch radius and β is the selected arm angle. Fixed-arm speed is input speed divided by N. The phase term describes the ideal pitch-circle construction as the arm is repositioned; it is an angle, not an output-speed change at rest. The picture uses normalized dimensions. Tooth contact, usable arm limits, interference, force, efficiency and holding ability require the actual tooth surfaces and are not calculated.
A spiral on a convex sphere
Reuleaux describes a generating circle turning about one of its diameters while a radius advances around the circle at a proportional angular rate. The radius endpoint traces a spherical spiral. Successive spiral crossings on a meridian are equally spaced. The historical gear construction gives this spiral a tooth-space form to engage a pinion.
The blue spherical screw carries a continuous raised thread. The gold pinion has a toothed rim and a central output shaft. The grey arm supports the pinion in front of the screw. The input shaft rotates about a fixed axis, while the pinion centre follows the arm around the sphere’s centre when the arm-angle control changes.
This view illustrates a convex spherical arrangement. An hourglass worm has a concave waist and is a different geometry. Its tooth-contact pattern and ratings cannot be transferred to this example.
The ideal pitch relationship
For the selected one-start spiral, one input revolution advances the pinion by one tooth when the arm is stationary. Therefore nout=nin/N. With 32 meridional intervals around a great circle of radius R, the pitch is p=2πR/32. A pinion with N matching pitch intervals has radius r=RN/32.
Let θ be input angle and β the arm angle, both in radians. In the ideal meridional construction, the pinion’s absolute angle is ψ=θ/N+(1+32/N)β plus a fixed alignment offset. Differentiating gives ψ̇=θ̇/N+(1+32/N)β̇. Thus moving the arm contributes to output motion; merely holding it at a new position does not add speed in this example.
The model uses a chosen uniform spiral pitch. It does not establish the complete three-dimensional mating flanks. The displayed arm range is an exploration range, not a certified working limit for a manufactured pair.
Example: a 20-tooth pinion
At 60 input rpm and 20 pinion teeth, fixed-arm output speed is 3 rpm. With R=80 mm and 32 meridional pitch intervals, p=15.708 mm and r=50 mm.
An arm position of 15 degrees contributes (1+32/20)×15=39 degrees to the ideal pinion phase, relative to the zero-arm-angle alignment. Once the arm is held still, the output again follows the 3 rpm fixed-arm value.
Understanding movable-axis gearing
The arrangement is useful for studying the difference between gear rotation and carrier motion. A pinion can rotate about its own axis while its supporting arm changes position. The output then contains contributions from both movements.
For a physical drive, the tooth surfaces must accommodate the chosen positions and load. The historical drawing alone does not supply manufacturing dimensions, a torque rating, a lubrication specification or a service-life prediction.
Pitch motion and tooth contact
Pitch geometry describes the intended relative motion and matching tooth spacing. Actual tooth flanks must transmit that motion without interference and with a suitable contact pattern. The illustrated thread and pinion give the parts visible shape and depth; their simplified profiles do not specify a manufactured pair.
This calculator therefore gives geometric pitch and motion results only. It does not estimate load sharing, surface stress or durability from a tooth count, and it does not determine whether a drive can resist back-driving.
Frequently asked questions
Is this an hourglass worm?
No. This illustration has a convex spherical spiral and a pinion on a movable arm. An hourglass worm has a concave waist.
Why is the fixed-arm ratio 1:N?
The example uses a one-start spiral. One input revolution advances the N-tooth pinion by one tooth while the arm is stationary.
Does changing arm angle change output speed?
Moving the arm contributes to the ideal output motion. Holding the arm at a fixed angle leaves the fixed-arm ratio unchanged in this uniform-pitch example.
What does the radius control change?
It changes the calculated meridional pitch and pinion pitch radius. The illustration retains normalized proportions for readability.
Are the displayed tooth shapes manufacturing profiles?
No. The raised thread and pinion teeth are illustrative profiles. They show the arrangement and ideal motion, but do not define a manufactured pair or validate three-dimensional tooth contact.
Can the calculator predict tooth stress or self-locking?
No. Those properties require actual contact geometry, materials, friction, lubrication and loading.
Mechanism references
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.