Omni-Telemeter and Odontograph: Two Hiscox Devices

← Back to Engineering Library

The omni-telemeter and odontograph are two separate instruments in Hiscox: one uses sight lines to find distance, while the other is a template for drawing gear-tooth curves. Explore their arrangements and compare gear pitch-circle radii with the calculator.

Gear Pitch-Circle Comparison Calculator

Enter declared gear tooth count N, a separately selected reference count Ns and diametral pitch P. The worksheet compares pitch-circle radii only; it does not reproduce an odontograph table, generate tooth curves or analyze the separate omni-telemeter.

0°

Declared pitch radius R
--
Selected reference radius Rs
--
Signed reference-radius difference
--
Declared reciprocal-pitch scale
--

Equation Used

R=N/(2P); Rs=Ns/(2P); deltaR=Rs-R; scale=1/P
Hiscox supplies no dimensions, tables or equations for either device. The calculator compares ordinary gear pitch-circle radii from entered tooth counts and diametral pitch; it does not generate the odontograph template or its tooth curves.
  • N and Ns are declared positive tooth counts and P is a declared positive diametral pitch in teeth per inch.
  • R=N/(2P) and Rs=Ns/(2P) are ordinary declared pitch-circle radii only.
  • The displayed difference deltaR compares two declared reference circles; it is not tooth-profile error.
  • The viewer keeps item 15310's optical paths and item 15316's scribe template in separate panels.
  • Mirror calibration, rangefinding accuracy, odontograph arc tables, pressure angle, addendum, dedendum, backlash, manufacture, gear rating and safety are excluded.

The left panel illustrates the optical omni-telemeter; the right shows the odontograph. The calculator compares gear pitch-circle radii, without calculating object distance or tooth profiles.

An optical distance instrument and a gear-drawing template

Hiscox item 15310 is an optical omni-telemeter. It uses a direct sight line through half-silvered mirror D and a reflected sight line at 90 degrees, or varied by mirrors D and F; lever L, micrometer screw C and graduated disk G adjust mirror F.

Item 15316 is separately captioned as an odontograph: a scribe template for laying out gear-wheel tooth curves. The source does not connect the two devices.

Two different measuring and drawing tasks

Hiscox describes the omni-telemeter as obtaining object distance from two observations on a perpendicular baseline. The odontograph serves a different task: guiding the layout of gear-tooth curves. The panels illustrate these purposes without simulating a calibrated instrument or generating a tooth profile.

Pitch-circle relationships for the gear example

R=N/(2P); Rs=Ns/(2P); ΔR=Rs−R; scale=1/P

These identities compare declared pitch circles. They do not supply the face/flank arc radii, offsets or scribe geometry omitted from Hiscox's short caption.

Declared reference-circle example

For N=36, Ns=40 and P=4 teeth/in, R=4.500 in, Rs=5.000 in, signed difference ΔR=+0.500 in and reciprocal-pitch scale=0.250 in/tooth. ΔR is not a predicted tooth-profile error.

Pitch circles and tooth profiles

A pitch circle defines a reference size for a gear. Comparing two such circles does not determine the shape of a tooth or the arc centres needed by a scribing template. The radius difference shown here is a comparison of reference dimensions, not an estimate of tooth-profile error.

Omni-telemeter and odontograph questions

Are these one mechanism?

No. They are separate Hiscox entries.

Does the calculator generate odontograph tooth curves?

No.

Does it calculate object distance?

No. The omni-telemeter panel is a qualitative source diagram only.

Primary source for both devices

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: