Hyperbola Scriber: Analytic Curve Geometry Calculator | FIRGELLI

← Back to Engineering Library

Calculate the focal separation and a point on the right branch of a hyperbola from its semi-transverse axis, eccentricity and normalized x-coordinate. Physical scriber accuracy and angular error are not calculated.

Hyperbola Scriber Interactive Calculator

Explore focus spacing, ordinate and the constant focal-distance difference for x/a at or beyond the vertex.

0°

Focal Separation
--
Hyperbola Ordinate
--
|r1-r2|
--
Angular Error
--

Equation Used

c=ae; b=a sqrt(e^2-1); x=ak; y=b sqrt(k^2-1); |r1-r2|=2a
Analytic hyperbola geometry for e>1 and k=x/a>=1. Stretch is not used in these ideal-curve results.
  • Canonical axis-aligned hyperbola centered at the origin with right branch x>=a.
  • Eccentricity e>1, c=ae and b=a sqrt(e²-1).
  • Euclidean point-to-focus distances at the entered normalized x-coordinate.
  • No actual scriber linkage, string routing/tension, compliance, friction, joint clearance, pencil offset, construction tolerance or angle-error model.

For x²/a² − y²/b² = 1 with e = c/a, the absolute difference between distances to the two foci is 2a. The stretch input does not affect this ideal curve; calculating a physical scriber’s error requires its mechanism and string geometry.

Canonical hyperbola geometry

For x²/a²−y²/b²=1, eccentricity e gives focal distance c=ae and b=a sqrt(e²−1). At x=ak, the positive ordinate is y=b sqrt(k²−1).

The animation traces analytic coordinates; it does not claim a buildable string or linkage mechanism.

Use as an analytic conic check

The results can verify focal separation, a point coordinate and the constant focal-distance-difference property. They cannot predict scriber accuracy or mechanical errors.

Constant focal-distance difference

With foci at (−c,0) and (+c,0), r1 and r2 are ordinary Euclidean distances. Points on one branch satisfy |r1−r2|=2a, independent of k.

Angular error cannot be derived from a stretch value alone. String length and routing, local tangent direction and the physical drawing mechanism would also be needed.

Worked hyperbola example

For a=100 mm, e=1.5 and k=1.6, c=150 mm, focal separation is 300 mm, b≈111.80 mm and y≈139.69 mm. The focal-distance difference is 200 mm=2a. The stretch input does not enter the ideal-curve calculation.

Scope and limitations

A real conic-drawing mechanism requires a defined linkage or string path, anchor locations, working range and branch, joint/link dimensions, interference checks, tension and sag, compliance, backlash and friction, pen offset, base flatness, calibration and tolerance propagation. None is inferred from analytic curve parameters alone.

Frequently asked questions

Why is the focal-distance difference constant?

That is the defining focal property of a hyperbola; its magnitude equals twice the semi-transverse axis, 2a.

Does stretch change the calculated curve?

No. Stretch is not used in the analytic geometry. A mechanical error model would need the particular string path or linkage, dimensions and deformation.

Does this design a scriber?

No. It evaluates the ideal analytic curve. Angular error is shown as not calculated.

Calculation basis

For a right-branch hyperbola x²/a² − y²/b² = 1, eccentricity e defines c = ae and b = a√(e² − 1). At x = ak, the positive ordinate is y = b√(k² − 1), where k ≥ 1.

The foci lie at (−c, 0) and (c, 0). Their separation is 2c and the absolute difference between distances from a curve point to the two foci is 2a. These are analytic curve properties, separate from the accuracy of a physical drawing mechanism.

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: