Ovoid Curve: Declared Convex Limacon Geometry

← Back to Engineering Library

Explore an asymmetric oval using the convex limaçon r=R(1+e cos theta). Change its size and asymmetry, inspect a selected radius and estimate its perimeter from straight segments. This is one specific polar curve, without a cam-and-follower motion model.

Declared Convex Limacon Geometry

Enter a base radius R, asymmetry factor e, marker angle beta and polygon sample count. The worksheet evaluates r=R(1+e cos theta) only; it is not a universal ovoid or cam law.

0°

Minimum polar radius
--
Maximum polar radius
--
Radius at beta
--
Sampled closed perimeter
--

Equation Used

r(theta)=R(1+e cos theta); rmin=R(1-e); rmax=R(1+e)
Perimeter is the closed polyline length through N equally spaced polar samples. Increasing N improves that numerical approximation but does not change the declared curve.
  • R is positive and 0<=e<=0.45, so the declared limacon remains positive-radius and convex.
  • The marker angle beta identifies one material point on the declared curve; animation phase rigidly rotates the entire curve without changing its geometry.
  • The sampled perimeter is a closed N-segment polygonal approximation, not an asserted closed-form arc length.
  • Camshaft, follower, dwell, lift, velocity, acceleration, pressure angle, contact, force, stress, material, tolerance, wear, lubrication and suitability are excluded.

The complete curve and selected point rotate together. Radius and asymmetry set the shape, while sample count sets the resolution of the perimeter approximation.

One declared polar curve, rotated as a rigid shape

MathWorld notes that an oval is an egg-like curve without a precise mathematical definition. To make every output reproducible, this page declares the limaçon r=R(1+e cos theta). MathWorld and university polar-graph references identify the general limaçon form r=b+a cos theta.

With b=R and a=Re, the entered range e<=0.45 satisfies b>=2a, the convex case. The animation rotates the complete sampled curve and its marker together; phase changes orientation only.

A geometry demonstrator, not an automatic cam profile

The declared curve is useful for exploring how one cosine radial perturbation changes a circle into a one-axis asymmetric convex loop. It does not establish lift, rise, dwell or fall for a contacting follower.

A real cam requires a specified follower arrangement and motion program, followed by pressure-angle, curvature, contact, material, lubrication, tolerance and dynamic analysis. None is inferred here.

Declared convex-limaçon identities

r(theta)=R(1+e cos theta); rmin=R(1-e); rmax=R(1+e); r(beta)=R(1+e cos beta)

The perimeter result is the sum of N straight segments joining equally spaced samples from zero through one full revolution, including the closing segment.

Declared curve example

For R=70 mm, e=0.25 and beta=60 degrees, minimum radius is 52.50 mm, maximum radius is 87.50 mm and the marker radius is 78.75 mm. With N=180 the displayed perimeter is a numerical polygonal approximation.

Those geometric values do not specify a shaft, follower or machine.

Sampling and model limits

More samples reduce the chord approximation error in the displayed perimeter. They do not add physical meaning or turn the curve into a manufacturable cam.

The selected marker is fixed to the curve. Its radius cannot be interpreted as follower lift without specifying where and how a follower contacts the rotating profile.

Ovoid-curve questions

Is there one universal ovoid equation?

No.

What curve does this calculator use?

Only r=R(1+e cos theta) over the stated range.

Does animation phase change the curve?

No; it rigidly rotates the complete shape.

Does the marker represent a follower?

No; it identifies one declared point on the curve.

Can this calculator design a cam?

No.

Polar-curve references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: