A gasoline motor car uses a spark-ignition engine to drive its wheels through a transmission. In a four-stroke engine, each cylinder completes intake, compression, power and exhaust over two crankshaft revolutions. Use the animation to follow the piston motion and the calculator to convert an angular interval into crank revolutions, cam revolutions and cycle equivalents.
Gasoline Motor Car Four-Stroke Cycle Interactive Calculator
Calculate crank revolutions, cycles per cylinder, aggregate power-stroke equivalents and cam revolutions for an entered angular interval.
Equation Used
- All counted cylinders operate on a four-stroke cycle.
- Each cylinder contributes one power stroke per completed 720-degree cycle.
- The camshaft rotates at half crankshaft speed.
- No firing-order, phase, torque, power, combustion, dynamic, load or safety model.
Fractional results are cycle equivalents, not a count of actual firing events. Cylinder phase, firing order, torque and engine power are not calculated.
Four-stroke cycle relationship
The U.S. Department of Energy describes the common four-stroke sequence as intake, compression, combustion/power and exhaust. NASA's four-stroke explanation notes that four piston strokes complete a firing sequence and that the crankshaft turns twice for each camshaft revolution.
The animation uses exact ideal slider-crank geometry and a half-speed cam marker. It is a schematic, not a model of gas pressure, valve timing or engine output.
Comparing crank rotation and engine cycles
Enter an angular interval and the number of cylinders to see the relationship between crankshaft rotation and four-stroke cycles. This is useful for learning why a camshaft turns once while a four-stroke crankshaft turns twice.
The cylinder count scales the aggregate cycle equivalent. It does not specify firing order or count the actual ignition events inside an arbitrary angular window.
Crank rotation and cycle equivalents
For an entered angle θ in degrees, crank revolutions are θ/360 and cycles per cylinder are θ/720. Camshaft revolutions also equal θ/720. Multiplying the per-cylinder cycles by cylinder count N gives Nθ/720 aggregate power-stroke equivalents.
Fractional equivalents express the portion of a complete cycle represented by the interval. They are not a count of actual firing events: that requires each cylinder’s phase and a specified starting point.
Example: 720 degrees and four cylinders
Enter 720° and 4 cylinders. The results are 2 crank revolutions, 1 cycle per cylinder, 4 aggregate power-stroke equivalents and 1 cam revolution.
At 180° and 4 cylinders, those results become 0.5 crank revolutions, 0.25 cycles per cylinder, 1 aggregate power-stroke equivalent and 0.25 cam revolutions. That equivalent does not establish how many cylinders actually fire within a particular 180° window.
Zero entered angle gives zero for every result. At the largest entries, 2880° and 12 cylinders, the results are 8 crank revolutions, 4 cycles per cylinder, 48 aggregate equivalents and 4 cam revolutions.
Scope and limitations
Cylinder count does not establish firing order, bank angle, crank phasing or event spacing. Real engine behaviour also depends on geometry, speed, torque, combustion pressure, breathing, ignition, valve timing, inertia, friction, heat rejection, loads and controls; none are calculated here.
Frequently asked questions
Why can the power-stroke result be fractional?
It is a cycle equivalent, calculated from the entered angular interval. It does not count actual firing events within that interval.
Does cylinder count define evenly spaced firing?
No. Firing order and cylinder phase are not inputs.
Does this calculate engine power?
No. Power requires additional information about work and time; this calculator converts an angle into revolutions and cycle equivalents.
Why does the animation keep moving while the results stay fixed?
The drawing loops through a complete cycle at a slow viewing speed. Results remain tied to the angular interval entered in the calculator.
Technical context
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.