Spring Cyclograph: Adjustable Drawing Rule, Animation and Polar-Curve Calculator

← Back to Engineering Library

A spring cyclograph is an adjustable rule for drawing circular arcs. Its elastic strip is thicker at the center, clamped at both ends to a support bar and bent with a central screw. The animation shows a pencil following its curved edge. A separate exponential-spiral calculator below explores polar drawing mathematics; it does not calculate the spring’s shape.

Spring Cyclograph · Selected Exponential Polar Trace

Watch a pencil follow a spring cyclograph, then explore a separate exponential polar trace with the drawing controls below.

0°

Selected Radius R(t)
--
Selected Radius Reduction
--
Selected Radius Remaining
--
Selected Turns Swept
--

Equation Used

theta=omega t; R=R0 exp(−zeta theta); loss=R0−R; remaining=100R/R0; turns=theta/(2pi).
Selected mathematical trace only; no physical spring, damping, friction or instrument-accuracy prediction.
  • R0 is the selected starting radius.
  • Zeta is a selected dimensionless radial-decay coefficient per radian, not a measured mechanical damping ratio.
  • Omega is the selected constant angular trace rate, not a measured natural frequency.
  • The trace begins at angle zero and uses ideal polar-to-Cartesian conversion.
  • Physical springs, masses, linkages, pen friction, backlash, calibration, historical identity and accuracy are excluded.

The spiral calculator uses a selected radial-decay coefficient per radian and a selected angular trace rate. These controls describe the lower plot, independently of the spring rule shown above.

Same mechanism and inputs as the interactive calculator.

How the spring cyclograph works

Hiscox’s item 1516 shows an elastic strip held by two end clamps on a rigid bar. Turning the center screw bends the strip to the required curve. The strip is thicker in its central portion so that its outer edge forms a circular arc. A draughtsman follows that edge with a pencil. The animation holds one illustrative setting while the pencil traces the arc; it does not predict the spring’s elastic deformation.

Separate polar drawing exercise

The entered trace rate advances polar angle linearly with time. The entered decay per radian reduces radius exponentially with that angle. Converting the polar pair to x=R cos θ and y=R sin θ produces an inward logarithmic spiral when ζ is positive and a circle when ζ is zero.

What the calculator determines

Use it to evaluate the selected radius, radius loss, remaining percentage and turns at an entered time, and to visualize the corresponding mathematical trace.

Exact selected relationships

θ=ωt; R=R0 exp(−ζθ); loss=R0−R; remaining=100R/R0; turns=θ/(2π); x=R cos θ; y=R sin θ.

Selected-input example

At R0=100 mm, ζ=0.05 per radian, ω=2 rad/s and t=10 s, θ=20 rad and the selected radius is 100e^(−1) mm. This is mathematical trace arithmetic, not a measured instrument result.

Not a physical damping model

The symbol ζ is used here only as a selected radial-decay coefficient per radian. No mass, spring rate, damping coefficient, natural frequency, pen friction, link geometry, backlash or calibration is modeled.

Questions

Is ζ a measured damping ratio?

No. Here it is a selected dimensionless radial-decay coefficient per radian in the mathematical spiral.

Does the trace reproduce a particular cyclograph?

No. The spiral plot is a separate mathematical exercise. The spring rule above it illustrates Hiscox’s item 1516 at a fixed setting.

What happens at ζ=0?

Radius remains constant and the polar trace is circular.

References & Further Reading

Gardner D. Hiscox, Mechanical Movements, Powers, Devices and Appliances (1901), page 364, item 1516: spring cyclograph. The following harmonograph reference concerns the separate curve-drawing exercise.

  • Wikipedia contributors. Harmonograph. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: