Spring Wheel Mechanism: How It Works, Diagram, Parts, Uses & Calculator Explained

← Back to Engineering Library

NASA spring tires and earlier lunar wheels are airless compliant structures, but their real load-deflection behavior requires test data. This calculator performs selected static-weight, secant-stiffness, ideal one-degree-of-freedom frequency and rolling-speed arithmetic only. It does not rate or design a wheel.

Spring Wheel · Selected Static and Kinematic Ledger

Explore selected static-weight, secant-stiffness, ideal frequency and rolling-speed arithmetic.

0°

Static-Weight Proxy
--
Secant-Stiffness Proxy
--
Ideal Undamped Frequency Proxy
--
Ideal No-Slip Wheel Speed
--

Equation Used

Fproxy=mgn; ksec=Fproxy/delta; fproxy=(1/2pi)sqrt(ksec/m); N=v/(piD)×60.
Selected ideal arithmetic only; no wheel load rating, ride-performance or durability prediction.
  • m is a selected supported mass used for both static and ideal frequency arithmetic.
  • Standard gravity gn=9.80665 m/s² is used.
  • ksec is a secant proxy from the origin to the selected force-deflection point, not a measured tangent stiffness.
  • The frequency proxy is an undamped one-degree-of-freedom result.
  • Wheel rpm assumes pure rolling at the entered nominal diameter.
  • Nonlinearity, preload, damping, terrain, slip, fatigue and structural safety are excluded.

Former contact-force, vertical-stiffness and ride-frequency claims are narrowed to selected proxies; wheel rpm remains ideal no-slip kinematics.

Watch the Spring Wheel in motion
Video: Wheel spring suspension by Nguyen Duc Thang (thang010146) on YouTube. Used here to complement the diagram below.
Same mechanism and inputs as the interactive calculator.

Selected static and kinematic ledger

A selected supported mass is multiplied by standard gravity for a static-weight proxy. Dividing that value by a selected deflection gives a secant-stiffness proxy. The same selected mass and stiffness are used in an ideal undamped one-degree-of-freedom frequency calculation. Road speed and diameter give ideal no-slip wheel rpm.

What the calculator determines

Use it to compare selected load, deflection, diameter and speed values. Real compliant-wheel design needs measured nonlinear load-deflection curves, damping, unsprung and sprung masses, terrain contact, material fatigue and manufacturer limits.

Exact selected relationships

Fproxy=mgn; ksec=Fproxy/delta; fproxy=(1/2pi)sqrt(ksec/m); N=v/(piD)×60, with gn=9.80665 m/s² and consistent SI units.

Selected-input example

At 1000 kg selected mass, 60 mm deflection, 60 km/h and 700 mm diameter, the ledger reports the static-weight proxy, secant stiffness, ideal undamped frequency proxy and ideal no-slip wheel speed.

Not a wheel rating

The spring response is assumed linear only between zero and the selected point. The model excludes progressive stiffness, preload, damping, shear-band behavior, contact-patch geometry, terrain slip, heat, fatigue, lateral forces and structural safety.

Questions

Is contact force predicted?

No. The value is selected mass times standard gravity.

Is the frequency a ride prediction?

No. It is an ideal undamped single-mass proxy; real vehicle modes require a validated dynamic model.

Does rpm include slip?

No. It is ideal rolling kinematics.

References & Further Reading

  • Wikipedia contributors. Non-pneumatic tire. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: