A mechanical recording pressure gauge uses a pressure-sensitive element, such as a Bourdon tube, to move a pen or stylus through a linkage while an independent clock drive advances chart paper. The resulting trace records the element's position against time.
Recording Pressure Gauge Interactive Calculator
Enter the sensing-tip travel and linkage dimensions to calculate pen motion. Set elapsed hours to find the angle of a chart that turns once in 24 hours. The result cards show the endpoint values; playback illustrates the tip moving out and back while the chart turns.
Equation Used
- Rigid links with freely turning pins, all moving in one plane; the crank pin uses the negative-y solution in the equations.
- The entered Bourdon-tip displacement is prescribed; pressure-to-tip calibration is outside the model.
- The pen arm has a fixed 120 mm radius and its tip touches the chart.
- The circular chart represents one revolution in 24 hours, driven independently of the pen linkage.
- The results do not establish instrument accuracy or operating limits. A real recorder needs the correct sensing-element calibration, chart paper and manufacturer service procedure.
How the pen and chart move
Pressure changes deform the sensing element and move its tip. A connecting link turns a crank fixed to the pen shaft, which also carries the pen arm. The pen touches the chart while a separate clock drive advances the paper. Its position records the sensing-element movement against time.
In this diagram, the sensing tip moves horizontally, the link pivots at both ends, and the crank and 120 mm pen arm turn together. The red trace follows the pen and stays on the rotating chart. The tip follows an illustrative rise-and-return cycle; no measured pressure data is used.
Exploring recorder movement
Use the calculator to compare how crank radius and connecting-link length affect pen movement for a given sensing-tip displacement. Changing elapsed chart time rotates the time reference without changing the linkage endpoint.
The dimensions describe a simple planar linkage, not a particular commercial recorder. Converting pen position into pressure requires the actual sensing element, its calibration and the matching chart scale. The linked tide-gauge reference is one example of pressure-element motion recorded on a clock-driven chart.
Linkage geometry and chart timing
Let the fixed pen shaft be the origin, crank radius be r, link length be L, and initial crank angle be α₀=−145°. The tip lies on the horizontal shaft axis. Its baseline coordinate is b₀=r cos α₀−√(L²−r²sin²α₀); after selected displacement d, b=b₀+d.
Circle intersection gives Aₓ=(b²+r²−L²)/(2b) and the negative-y branch Aᵧ=−√(r²−Aₓ²). Therefore α=atan2(Aᵧ,Aₓ). With the 120 mm pen arm, endpoint stylus arc is s=120(α−α₀), using radians. Shaft sweep is (α−α₀)180°/π, and pen-arm angle is (α+π)180°/π. A separate 24-hour chart has time angle ψ=360°t/24=15°t.
Worked example
With 5 mm tip travel, a 35 mm crank radius and a 100 mm connecting link, the shaft sweeps 10.01°. The pen arm ends at 45.01° in the drawing, and its tip travels through a 20.96 mm arc about the shaft. At 8 elapsed hours, a 24-hour chart has turned 120°.
Increasing tip travel to 10 mm gives 18.74° shaft sweep and 39.25 mm stylus arc. The response is not exactly proportional because the link angle changes. These are linkage displacements, not pressure values.
What affects a real recording gauge?
The ideal linkage shows how the pen position changes as the sensing tip moves. A real recorder also depends on sensing-element calibration, link adjustment, bearing friction, backlash, pen contact force, chart speed, temperature and hysteresis.
The stylus arc measures movement about the pen shaft. It is not the length of the red trace on the moving chart or a pressure scale. The chosen link lengths and pen travel alone cannot establish recording accuracy.
Recording pressure gauge questions
Does tip travel equal pressure?
No. Tip travel is entered directly in millimetres. Converting it to pressure requires the calibration of the particular sensing element.
Why does the chart turn independently?
The clock drive moves the chart steadily while the pressure element positions the pen. This separates the time coordinate from the measured movement.
Is stylus arc the printed pressure scale?
No. It is distance along the circular path of the 120 mm pen arm, measured from its starting position. It is neither a pressure reading nor the length of the trace on the moving paper.
What is the difference between shaft sweep and pen-arm angle?
Sweep is the change from the initial crank position of −145°. The pen arm points opposite the crank, so its angle is α + 180°; its starting angle is 35°. The diagram uses screen coordinates, with positive angles clockwise from the rightward horizontal.
Why does elapsed chart time not change pen travel?
Elapsed time sets the chart angle at 15° per hour. The pen position depends on tip travel and linkage dimensions. During playback the chart makes a full turn per animation loop, starting from the selected time offset; the loop is a sped-up illustration, not a measured pressure history.
Does the calculator determine recorder accuracy?
No. It solves an ideal rigid linkage. Instrument accuracy also depends on the sensing element, friction, backlash, temperature, pen contact and calibration against the chart scale.
Primary mechanism references
- US897311A, Pressure-recorder — Bourdon tube spring, link-and-lever pen motion and automatically rotated chart.
- US2592159A, Tide gauge — pressure-operated Bourdon tube, stylus and clock-driven circular chart; the described embodiment uses a 24-hour chart.
- JP4181967B2, Self-recording pressure measuring device — Bourdon-tip motion transmitted through a connecting mechanism and pen arm to rotating chart paper.
Continue exploring engineering
Find another tool, explore an animated mechanism, or browse resources by subject.
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.