Self-registering Tide Gauge: How It Works, Stilling Well Diagram, Parts, Uses & Orifice Calculator

← Back to Engineering Library

A historical self-registering tide gauge uses a float inside a stilling well. A wire, pulleys and counterweight transmit float height to a pen while a clock-driven chart supplies the time axis.

Float Tide Gauge Well/Orifice Geometry

Convert a selected stilling-well diameter and area ratio into exact circular well/orifice geometry.

0°

Well Area
--
Orifice Area
--
Equivalent Orifice Diameter
--
Open Area
--

Equation Used

Aw=πdw²/4; Ao=Aw/R; do=dw/√R; open area=100/R.
Geometry only; hydraulic damping, attenuation, phase lag, flow losses, blockage and measurement accuracy are excluded.
  • Well and inlet cross-sections are circular.
  • The selected area ratio is positive.
  • The mechanism animation is quasi-static and does not represent calculated damping.
  • Hydraulic response and measurement accuracy are excluded.

Area ratio is well area divided by orifice area.

Connected float recorder

NOAA describes older gauges in which a float rose and fell inside a stilling well and drove a stylus through wires, pulleys and gears. The well sheltered the float from short-period surface disturbance.

The animation shows quasi-static equal water levels inside and outside the well. It does not calculate attenuation or phase lag through the inlet.

What the calculator determines

Select well diameter dw and well-to-orifice area ratio R = Aw/Ao. The calculator reports well area, orifice area, equivalent circular orifice diameter and open-area percentage.

The default 300 mm well and R = 144 approximate NOAA's documented 12-inch well with 1-inch orifice.

Geometric conversions

Aw = πdw2/4. Ao = Aw/R. For a circular orifice, do = √(4Ao/π) = dw/√R. Open-area percentage is 100/R.

Selected-input arithmetic

For dw = 300 mm and R = 144, well area is about 706.9 cm², orifice area 490.9 mm², equivalent orifice diameter 25 mm and open area about 0.694%.

Model boundary

Area ratio alone does not determine a stilling well's transfer function. Tide period, inlet shape and length, head losses, flow regime, well storage, currents, blockage and air effects are absent, so damping, time constant, attenuation, phase lag and tsunami response are unresolved.

Questions

Does a smaller orifice always improve the record?

No. It may suppress waves but also increase lag, blockage sensitivity and other errors.

Does the animation show calculated lag?

No; it is explicitly quasi-static.

Are modern NOAA gauges float-operated?

Modern stations generally use acoustic or electronic sensors; this page describes the historical mechanical system.

References & Further Reading

  • Wikipedia contributors. Tide gauge. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: