A lantern wheel has cylindrical rods, called trundles, arranged around its shaft between end plates. A latch or roller can bear against a trundle to prevent further rotation. Hiscox figure 1025 shows both forms. The animation illustrates a roller arm being released, withdrawn, returned to a gap and held while the next trundle reaches it.
Lantern-wheel Stops Interactive Calculator
Enter the trundle pitch diameter, count, diameter and an illustrative clearance. The calculator distinguishes circular arc pitch from straight-line gaps. Roller diameter is calculated for a specific position: its center lies on the trundle pitch circle midway between neighboring trundles before contact.
Equation Used
D is trundle-center pitch diameter, N is trundle count, d is trundle diameter and c is the shortest surface clearance from the centered roller to each adjacent trundle. These are geometric relations, not recommended working clearances. A nonpositive gap or roller size suppresses the roller result and stops the cycle. The arm’s holding and release drive, impact loads and elastic deflection are not modeled.
The stop acts on a rod, not a cut gear tooth
Two end plates locate the trundles around the wheel. Viewed along the shaft, they appear as a ring of circles. A stop placed in their path can block the next rod. A pivoted arm lets the stop move clear when rotation is required.
The animation shows an end view through the front plate. Its circular roller is carried by a rigid arm. The arm is held during the stop interval, moves outward, stays clear while the wheel advances, and returns before the final approach to contact. The drive that holds and releases the arm is omitted; the roller is not shown as a self-locking device.
The wheel advances one trundle pitch per eight-second demonstration cycle. That timing is chosen for visibility and is not a speed rating or a model of an actual clock’s counting mechanism.
Stopping and releasing a rotary member
The historical drawing presents latch and roller alternatives for engaging a lantern wheel. A larger mechanism must determine when the stop releases and how many turns or steps the wheel makes before it returns.
The stop alone does not count revolutions. A counter, cam, linkage or other controller can provide the release sequence. No particular clock, counter or commercial product is identified by the dimensions in this example.
Use chord geometry for circular parts
The center-to-center arc pitch is πD/N. The straight distance between neighboring trundle centers is instead D sin(π/N). Subtracting the trundle diameter gives their shortest straight surface gap. Arc length is longer than chord length and cannot be substituted when checking two circular solids for interference.
For the illustrated roller position, its center is on the same pitch circle halfway around the angle between two trundles. Its distance to either trundle center is D sin(π/(2N)). Subtract the trundle radius and clearance c to obtain the roller radius, then double it. This gives 2D sin(π/(2N)) − d − 2c.
This roller diameter applies only to that declared center location. Moving the stop radially, using a shaped latch or changing its approach requires a different clearance calculation. A positive result is not a strength or reliable-locking assessment.
Example: eight 3 mm trundles on a 20 mm pitch circle
With D=20 mm and N=8, the center arc pitch is 7.854 mm and angular pitch is 45°. The straight center distance is 20 sin(22.5°)=7.654 mm, so the shortest trundle gap is 4.654 mm.
At a chosen clearance of 0.2 mm, the illustrated roller diameter is 40 sin(11.25°) − 3 − 0.4 = 4.404 mm. With the roller centered in the angular gap, it has 0.2 mm shortest surface clearance to each neighboring trundle. The wheel then advances slightly until one trundle touches the held roller.
These dimensions explain the geometry. They do not specify replacement parts, tolerances, return-spring force or allowable speed for a clock or machine.
Geometric fit and stopping loads are different
Increasing trundle count reduces angular pitch and available space at a fixed wheel diameter. Increasing trundle diameter also reduces clearance. The animation keeps the entered diameter ratios, while fitting the whole view on screen.
Actual stopping behavior depends on wheel inertia, speed, applied torque, contact shape, arm restraint, materials and compliance. A roller that fits between rods can still overload, rebound or move its arm under load. Those questions require the complete mechanism; no universal accuracy, wear allowance or service-life claim follows from the spacing formulas.
Frequently asked questions
Why are arc pitch and straight gap different?
Arc pitch is measured around the pitch circle. Interference between adjacent cylindrical trundles depends on their straight center distance, which is the chord.
Where is the roller center for this calculation?
At the pitch-circle radius, midway in angle between two neighboring trundles before the wheel approaches contact. The formula does not apply to every stop position.
Is the entered clearance a recommended tolerance?
No. It is an illustrative geometric input. Actual working clearance depends on the mechanism, loading, materials and manufacturing details.
What happens when the dimensions cannot fit?
If trundles overlap or no positive roller diameter remains, the display shows no geometric fit and suppresses the roller-diameter result. The entered wheel layout stays visible for comparison.
What holds the roller arm at the stopping position?
The illustration prescribes the arm’s held and released positions. Its holding actuator or locking linkage is not modeled. A free pivoted roller is not automatically a secure stop.
Does this reproduce a particular clock’s strike count?
No. The demonstration advances one trundle pitch per cycle. It does not include a clock’s count wheel, release cam, gearing or strike sequence.
Can I use the result as a load rating?
No. The calculator checks ideal circular geometry only. Contact stress, impact energy, arm stiffness, bearing loads and fatigue are not calculated.
Mechanism references
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.