Worm-and-pinion (modified): How the Globoid Hybrid Gear Works, Parts & Industrial Uses

← Back to Engineering Library

A worm turns a mating wheel to reduce speed and increase torque. The modified arrangement illustrated here uses a curved contact region. Enter a reduction ratio, input torque, speed and assumed efficiency to compare the output quantities.

Worm-and-pinion Modified Interactive Calculator

Compare output speed, torque and estimated power loss from an entered reduction ratio and efficiency. The contact-teeth input divides an assumed load equally; it does not solve tooth contact.

0°

Calculated output torque
--
Calculated output speed
--
Assumed load share per tooth
--
Calculated power loss
--

Equation Used

Output speed = input speed / reduction ratio. Output torque = input torque × reduction ratio × entered efficiency. Input power = input torque × 2π × input rpm / 60. Estimated loss = input power × (1 − entered efficiency). Assumed load share per contact tooth = 100% / entered contact teeth.
Efficiency and contact count are assumptions you enter. Equal sharing between teeth is an arithmetic assumption, not a contact-stress result. The calculator does not determine tooth shape, backlash, friction, strength, wear or safe torque.
  • Inputs are user-supplied scenario values.
  • The displayed equations are evaluated directly.
  • Entered efficiencies, shares, limits and factors are not predicted.
  • The visual is schematic and not dimensional.
  • Strength, fatigue, wear, variation, controls and safety compliance are omitted unless explicitly calculated.
Same mechanism and inputs as the interactive calculator.

How the Modified Worm and Pinion Works

The worm drives the wheel through their contact region. This schematic shows synchronized input and output rotation; the drawn tooth outlines do not specify a manufactured gear profile.

What This Calculator Represents

Efficiency and contact count are assumptions you enter. Equal sharing between teeth is an arithmetic assumption, not a contact-stress result. The calculator does not determine tooth shape, backlash, friction, strength, wear or safe torque.

Calculation Method

Output speed = input speed / reduction ratio. Output torque = input torque × reduction ratio × entered efficiency. Input power = input torque × 2π × input rpm / 60. Estimated loss = input power × (1 − entered efficiency). Assumed load share per contact tooth = 100% / entered contact teeth.

How to Read the Result

Change one input at a time to compare its effect. Apply the assumptions stated beside the equations when interpreting each result.

Assumptions and Limits

Efficiency and contact count are assumptions you enter. Equal sharing between teeth is an arithmetic assumption, not a contact-stress result. The calculator does not determine tooth shape, backlash, friction, strength, wear or safe torque.

Frequently Asked Questions

Does the contact-teeth result give a tooth force?

No. It is the percentage obtained by dividing 100% equally among the entered number of contacting teeth. It does not calculate contact force or stress.

Does the efficiency input predict the gear losses?

No. Efficiency is a value you supply. The power-loss result applies that assumed efficiency to the calculated input power.

Is the drawing suitable for manufacturing?

No. It is a schematic explanation and does not specify manufacturing dimensions, tolerances or materials.

Can these results establish a safe working load?

No. Strength, fatigue, wear, operating conditions and the complete assembly must be assessed separately.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: