Windmill of Our Grandfathers: Pump Animation and Stroke Calculator

← Back to Engineering Library

An entered wheel speed divided by entered wheel-revolutions-per-stroke gives ideal stroke cycles per minute. Stroke length sets crank radius and total reciprocating rod travel.

Back-Geared Windmill Head Interactive Calculator

Enter wheel RPM, wheel revolutions per pump stroke and full pump stroke. Results are kinematic only—not water delivery, torque or pump capacity.

0°

Ideal complete cycles per minute
--
Ideal pump-crank speed
--
Half entered stroke
--
Up-plus-down distance per minute
--

Equation Used

stroke rate=Nwheel/G; crank rpm=stroke rate; crank radius=S/2; total rod travel=2 S stroke rate/12.
Gear-ratio units are interpreted exactly as rev/stroke. Rod travel counts both directions each cycle.
  • Wheel speed is entered and steady.
  • Gear value is wheel revolutions per pump stroke.
  • One crank revolution produces one full reciprocating cycle.
  • Stroke is peak-to-peak travel and crank radius is half stroke.
  • Slip, dynamics, force, pump efficiency and water delivery are omitted.
Same mechanism and inputs as the interactive calculator.

Wind-Pump Motion and Stroke Rate

The animation closes an exact crank-slider with the entered crank radius and labels total two-way rod travel.

What This Calculator Represents

Ideal speed conversion and reciprocating distance only.

Stroke and Travel Equations

Ns=Nw/G
Nc=Ns
r=S/2
travel=2SNs/12

Worked Scenario

At 45 rpm, 3 rev/stroke and 7.5 in stroke, rate is 15 strokes/min, crank radius 3.75 in and total rod travel 18.75 ft/min.

Model Boundary

No water displacement, load, torque, losses, wind resource or structure is calculated.

Frequently Asked Questions

Why divide by gear ratio?

Its units are wheel rev/stroke.

Is rod travel net motion?

No; it sums both directions.

Is water flow calculated?

No.

Is crank radius full stroke?

No; it is half.

Are losses included?

No.

Can this size a pump?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: