Riefler Double Escape Wheel: Side View and Angle Comparisons

← Back to Engineering Library

Sigmund Riefler's 1893 patent describes a driving wheel and a larger locking wheel rotating on the same axis. Each pallet engages both wheels, and the anchor transmits impulse by bending the pendulum suspension spring.

Two Escape-wheel Pallet Escapement Side Interactive Calculator

Enter an ideal equal-array tooth count, two comparison angles and a one-side arc. Results are direct angle calculation—not wheel phasing, pallet setup, supplementary arc, impulse energy or clock rate.

0°

Ideal equal-array pitch
--
Entered-angle midpoint
--
Midpoint / pitch
--
Twice entered arc
--

Equation Used

pitch=360 degrees/N; midpoint=(lower entered angle+higher entered angle)/2; midpoint/pitch=100 midpoint/pitch; displayed swing=2 one-side arc.
These identities summarize entered angles only. The patent supplies no basis for treating the midpoint as a target adjustment or the entered arc as a solved Riefler pallet motion.
  • The tooth count defines an ideal equal angular array.
  • The low and high angles are user-entered comparison bounds, not tolerances or patent settings.
  • The midpoint is only the arithmetic average after sorting the two entries.
  • Displayed swing is twice the entered one-side arc by definition.
  • Tooth profiles, pallet surfaces, axial spacing, depthing, drop, lock, clearance, spring stiffness, pendulum dynamics, torque, friction, wear, rate and safety are omitted.
Same mechanism and inputs as the interactive calculator.

Riefler's Double Wheel in Side View

Riefler patent 508,760 places a driving wheel H and a larger locking wheel R on the same axis. Their teeth have different working surfaces. Each cylindrical, half-cut pallet S engages both wheels, while the anchor carries the pendulum suspension device.

When a locking tooth releases, the wheels advance and a driving tooth moves the anchor. That motion bends the suspension spring around the pendulum's oscillation axis, storing the tension that supplies impulse.

What This Calculator Represents

The tool computes pitch for an ideal equal angular array, averages two entered angles, compares that midpoint with pitch and doubles an entered one-side arc.

It does not provide escapement setup targets or reconstruct Riefler contact and pendulum dynamics.

Direct Angle calculation

ideal equal-array pitch = 360° / N
entered-angle midpoint = (lower entry + higher entry) / 2
midpoint / pitch = 100 × midpoint / pitch
displayed swing = 2 × entered one-side arc

None of these identities establishes depthing, drop, lock, impulse or supplementary pendulum arc.

Worked Arithmetic Example

For 30 equally spaced teeth, ideal pitch is 12°. Entered bounds of 2° and 4° have midpoint 3°, which is 25% of that pitch. An entered one-side arc of 4° displays as 8° total.

Assumptions and Limits

  • Illustrated arrangement: distinct coaxial driving and locking wheels, common pallets, anchor and suspension spring.
  • Calculated: only ideal equal-array and entered-angle arithmetic.
  • Not calculated: real wheel phase, tooth and pallet geometry, depthing, drop, lock, impulse, spring energy, supplementary arc, pendulum rate, wear, tolerance or suitability.

Frequently Asked Questions

Are the wheels on separate arbors?

Riefler's patent claims the driving and locking wheels on the same axis.

Is the midpoint a recommended phase?

No. It is only the mean of two entered angles.

Does midpoint / pitch measure contact quality?

No.

Is displayed swing a solved pallet motion?

No. It is twice the entered one-side arc.

Does the tool calculate supplementary pendulum arc?

No.

Can this set up or rate a precision clock?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: