Toothed Link Chain and Pulley: Ideal Speed and Pitch Geometry

← Back to Engineering Library

An inverted-tooth or silent chain uses interleaved toothed links joined by pivots; the link flanks engage a toothed sprocket to transmit motion. This calculator reports ideal kinematic quantities from entered tooth count, pitch and rotational speed, not a chain rating.

Same mechanism and inputs as the interactive calculator.

Inverted-tooth Chain Topology

U.S. Patent 4,758,210 describes rows of inverted-tooth links, guide links, pivot pins and equally spaced sprocket teeth. It identifies a chain pitch line through the link-aperture centres and a sprocket pitch line that substantially coincides with it as the chain wraps the sprocket.

Other silent-chain patents likewise describe interleaved link rows whose tooth flanks contact sprocket teeth to transfer power. Exact tooth profiles and contact sequences are design-specific.

What This Calculator Does

The tool computes ideal pitch advance from entered teeth, pitch and RPM, converts that speed to feet per minute, evaluates the exact pitch-circle diameter from chord geometry and reports tooth passages per second.

It does not select a chain, sprocket, guide, tensioner, lubricant or operating limit.

Ideal Kinematic Relations

v = z p n/60
vft/min = 196.850394 v
dp = p/sin(pi/z)
fe = z n/60

For the diameter relation, adjacent pitch points form a chord p subtending 2pi/z at the sprocket centre. Engagement frequency is an event rate, not a calculated resonance or noise frequency.

Worked Ideal Example

For z=21 teeth, p=9.525 mm and n=1475 RPM, ideal pitch advance is about 4.92 m/s or 968 ft/min. Exact pitch-circle diameter is about 63.9 mm, and tooth-engagement frequency is 516.3 Hz.

These kinematic values do not establish allowable speed, transmitted power, load, service life or noise.

Model Boundary

  • Mechanical arrangement: interleaved inverted-tooth links, pivots, guide links and engagement with sprocket teeth along coincident pitch-line geometry.
  • Calculated: ideal pitch advance, unit conversion, exact pitch-circle diameter and tooth-passage rate.
  • Not calculated: torque, power, chain pull, dynamic tension, centrifugal effects, chordal speed variation, contact ratio, tooth or rocker-joint profile, phasing, impact, resonance, vibration, noise, friction, lubrication, thermal behavior, alignment, wear, fatigue, strength, capacity, ratings or safe use.

Frequently Asked Questions

Is ideal pitch-advance speed the exact instantaneous chain speed?

No. It is the mean kinematic advance; polygonal action and dynamics are omitted.

Why is pitch-circle diameter p/sin(pi/z)?

Pitch is the chord between adjacent pitch points on a z-sided pitch polygon.

Is tooth-engagement frequency a resonance prediction?

No. It is only tooth passages per second.

Does positive engagement mean real slip is impossible?

No. This model does not evaluate tooth disengagement, damage or abnormal operation.

Does the calculator establish an allowable chain speed?

No. Use authenticated manufacturer data for the exact chain, sprocket and conditions.

Can it size a drive or predict service life?

No.

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: