Hiscox movement 1167 is a tri-tooth pendulum escapement. Pins act on pallets A and B alternately, stops D and E hold the escapement during the extreme portion of the pendulum stroke, and the three-legged wheel completes one revolution every third stroke.
Three-legged Pendulum Escapement Interactive Calculator
Set an illustrative wheel radius, pin radius, pendulum length and the time between pendulum strokes. The calculator reports 120-degree stepping and timing rates; it does not calculate impulse energy or clock accuracy.
Equation Used
- One pendulum stroke releases one of three equal 120-degree wheel steps.
- T is the elapsed time between successive pendulum strokes.
- Wheel radius, pin radius and pendulum length affect only the explanatory drawing and pin-radius ratio.
- Impulse, pallet profile, locking depth, recoil, friction, amplitude, train torque, fly dynamics and clock-rate error are omitted.
Hiscox Movement 1167
Hiscox labels this a tri-tooth pendulum escapement. Pins act against pallets A and B alternately, while stops D and E hold the escapement during the extreme part of the pendulum stroke.
Hiscox describes one wheel rotation every third pendulum stroke. The calculator uses that sequence to convert the entered stroke interval into wheel speed.
What This Explanatory Calculator Does
The tool converts an entered stroke interval into strokes per minute and wheel revolutions per hour using the three strokes per revolution described by Hiscox.
The wheel, pin and pendulum dimensions affect the schematic and a displayed pin-to-wheel radius ratio only.
Three-stroke Timing
strokes/min = 60/T
wheel rev/h = 3600/(3T)
pin ratio = 100 rpin/R
Impulse energy is not calculated. The model has no mass, drop, lever-arm or contact-geometry inputs needed to evaluate energy transfer.
Worked Timing Example
At one second per pendulum stroke, the display advances 120 degrees per stroke, giving 60 strokes per minute and 1,200 wheel revolutions per hour. With a 3 mm displayed pin radius and 55 mm wheel radius, the schematic radius ratio is 5.5%.
These dimensions are illustrative, not Hiscox specifications.
Model Boundary
- Historical arrangement: alternating pins and pallets A/B, stops D/E and one revolution every third pendulum stroke.
- Calculated: fixed 120-degree step, timing rates and a dimensionless displayed-radius ratio.
- Not calculated: impulse energy, gravity-arm fall, bob velocity, amplitude, locking depth, recoil, train torque, fly action, accuracy, wear, materials, tolerances or safe construction.
Frequently Asked Questions
Is this Denison's gravity escapement?
No. This is Hiscox’s tri-tooth escapement, movement 1167, with alternating pin-and-pallet contact and stops D and E.
Why is each displayed step 120 degrees?
Three equal steps complete one revolution.
What do stops D and E do?
Hiscox states that they hold the escapement during the extreme portion of the pendulum stroke.
Are the entered dimensions historical?
No. They control the explanatory drawing only.
Does the calculator predict impulse energy?
No. The required mass, drop and contact geometry are not specified.
Can it predict clock accuracy?
No.
References
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.