Science Museum Group records identify Watt's sun-and-planet gear as the geared rotative-motion arrangement that replaced a conventional crank to avoid infringing an existing patent. In the ideal model, the planet is held against spin by its rod while its centre orbits the sun; equal tooth counts produce two sun/flywheel revolutions per carrier orbit.
Sun and Planet Gear Interactive Calculator
Vary user-entered sun teeth, planet teeth, metric module and carrier-orbit rate. Results are ideal held-planet epicyclic kinematics and pitch geometry, not historical dimensions or a gear-strength, efficiency or wear calculation.
Equation Used
- Ideal involute pitch geometry with a compatible common module.
- The planet body is held against spin while its centre completes a carrier orbit.
- Entered values are scenarios, not dimensions or speeds supplied by the cited collection records.
- No strength, backlash, efficiency, torque, bearing load, wear, lubrication or flywheel-energy prediction.
How the Sun-and-planet Gear Produces Rotation
Science Museum Group identifies the geared arrangement on Boulton and Watt's rotative engine as sun-and-planet gear and explains that it replaced the conventional crank to avoid infringing an existing patent. Birmingham Archives identifies the 25 October 1781 patent as covering several rotative-motion methods, including this gear.
In the idealized relation used here, the planet gear is attached to the rod and held against spin while its centre orbits the fixed-axis sun. External gear contact then turns the sun by one carrier revolution plus the tooth-ratio contribution. Equal tooth counts therefore give two sun revolutions per carrier orbit.
Using the Animation and Calculator
Change the tooth counts to compare the ideal speed ratio, then change the module to see how it affects gear diameter and centre distance.
It does not size a real gear train. Real design requires pressure angle, tooth form, face width, materials, load spectrum, bearings, alignment, lubrication, backlash, stress and applicable safety factors.
Ideal Held-planet Relation
For sun tooth count N_s and planet tooth count N_p:
With entered carrier rate n_c, sun speed is n_c times that multiplier. For entered metric module m, sun pitch diameter is mN_s and pitch-centre distance is m(N_s + N_p)/2.
Worked Example: Equal Gears
For 24 sun teeth, 24 planet teeth and 12 mm module, the ideal multiplier is 1 + 24/24 = 2. At 12.5 entered carrier orbits per minute, the ideal sun/flywheel speed is 25 rpm. Sun pitch diameter and pitch-centre distance are both 288 mm.
These are user-entered ideal values, not a historical machine rating.
What the Calculator Includes
- Historical arrangement: the arrangement was a Watt rotative-motion alternative and the sun-and-planet gear came into use.
- Calculated: ideal held-planet tooth-ratio speed and module-based pitch geometry.
- Not calculated: strength, torque, efficiency, backlash, wear, lubrication, bearing load, beam dynamics or flywheel energy.
Frequently Asked Questions
Why was the sun-and-planet gear used?
Science Museum Group records say the geared arrangement replaced the conventional crank to avoid infringing an existing patent.
Why does the equal-gear case give 2:1?
With the planet held against spin, the ideal multiplier is 1 + N_p/N_s. Equal tooth counts make that 2.
Does the planet centre move in a straight line?
No. In the ideal epicyclic model its centre orbits the sun centre; the rod constrains the planet body's orientation.
Are the entered tooth counts and module historical?
No. They are adjustable values for exploring ideal speed ratios and pitch geometry.
Can this calculator size a real gear?
No. It does not calculate tooth stress, materials, face width, backlash, alignment, bearings, lubrication or fatigue.
References
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.