This historical lightning arrester stacks discs of non-arcing composition between thin mica sheets. Hiscox describes the discharge dividing into many fine sparks. Explore that arrangement and calculate stack dimensions from example disc and separator measurements.
Declared Disc-and-Mica Stack Geometry
Enter declared disc count, disc thickness, mica-sheet thickness and disc diameter. The worksheet reports stack dimensions only. It does not predict sparkover voltage, current, energy, interruption, insulation coordination or safe arrester performance.
Equation Used
- The stack contains n equal circular discs and n-1 equal mica separators.
- Disc and mica thicknesses are declared geometric inputs, not historical dimensions.
- The visual spark paths illustrate the source description but do not calculate breakdown or current sharing.
- Material composition, voltage distribution, dielectric strength, creepage, impulse shape, follow current, heating, ageing, enclosure, terminals, grounding, coordination, ratings and safety are excluded.
The calculator determines the dimensions of an alternating disc-and-mica stack. Spark markers illustrate the historical description; they do not represent calculated current or electrical performance.
Thin mica interfaces split the historical discharge
Hiscox item 759a describes a stack of circular discs made from non-arcing composition, separated by thin mica sheets. It states that a discharge jumps readily through the many thin sheets and divides into hundreds of fine sparks that lack enough body to pull an arc.
The historical description explicitly emphasizes that the device needs no fuses, magnets or moving parts. The viewer illustrates the historical disc-and-mica stack.
A historical circuit-protection topology
Hiscox classifies the device under electric power and construction. Alexander Wurts's 1893 patent separately documents the period objective of preventing dynamo current from following a static discharge by constraining the discharge space. This page does not rate the stack for any voltage, circuit or installation.
Declared stack geometry only
These are dimensional identities. They are not an electrical energy, surge-current or arc-interruption model.
Declared geometry example
Eight declared 10 mm discs require seven declared 0.25 mm mica interfaces. With 100 mm disc diameter, the ideal stack height is 81.75 mm, combined mica thickness is 1.75 mm and the disc diameter/thickness ratio is 10.0:1.
Stack dimensions and electrical performance
Disc count and thickness determine stack height, but dimensions alone do not establish sparkover voltage, surge-current capacity or arc interruption. The historical description explains the intended action of the arrangement; this geometry calculator does not provide an electrical rating or a selection method for modern equipment.
Historical non-arcing arrester questions
Is this a modern zinc-oxide MOV stack?
No. Hiscox describes non-arcing composition discs separated by mica.
Does the calculator determine breakdown voltage or energy?
No. It reports declared geometry only.
Are the animated sparks a current calculation?
No. They qualitatively illustrate the source's many-fine-sparks description.
Historical non-arcing arrester references
- Hiscox, Mechanical Movements, page 202, item 759a: primary public-domain plate and description of circular non-arcing discs, thin mica separators and divided fine sparks.
- US509784A, Universal non-arcing lightning arrester: Alexander Wurts's 1893 primary patent describing a narrow discharge space intended to prevent dynamo follow-current arc formation.
- Modern Electrical Construction: period technical text explaining follow-current arcing and the Wurts non-arcing arrester context.
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.