These historical multiple-bladed shears use overlapping plates on spring-connected handles. A screw in a slot limits their relative movement. Explore the sliding arrangement and calculate the travel available from a chosen slot length and stop diameter.
Sliding-Plate and Slot-Stop Travel Calculator
Enter declared blade-row count, slot length, stop diameter and requested relative slide. The worksheet reports the slot's usable interval and clamps the requested slide to it. It does not predict cutting performance, force, speed or safe use.
Equation Used
- The screw center is fixed to one plate while the straight slot translates with the other plate.
- The stop is represented by a circular diameter within a slot of declared overall length.
- Both plates remain parallel and the animation magnifies their declared relative slide.
- Blade contact, cutting force, spring force, handle deformation, friction, sharpening, animal handling and suitability are excluded.
The slot and screw limit the plate slide. The calculator caps the requested movement at the available travel; cutting force and blade engagement are not calculated.
Two plates slide under a screw-and-slot stop
The historical drawing labels handles a, plates b and b′, coiled spring c, blades d, slot f and screw g. The plates overlap and slide on one another as the handles are worked; the screw travels within the slot and limits relative motion. Opposed blade rows at the front create multiple shearing edges.
The animation preserves that connection map and magnifies a declared plate slide. Blade profiles are illustrative; handle elasticity and contact forces are not modeled.
A historical hand-tool mechanism study
This page explains the specific sliding-plate multiple-bladed shears shown in period technical references. It is distinct from a powered shearing handpiece with a reciprocating cutter on a fixed comb.
Declared straight-slot travel limit
The identity calculates one-dimensional clearance for the entered values. It neither rates the stop nor determines blade engagement.
Declared travel example
For a declared 20 mm slot and 4 mm stop diameter, usable center travel is 16 mm. A requested 12 mm slide is therefore unclamped and leaves 4 mm before the stop endpoint. These are illustrative inputs, not historical dimensions.
Plate travel and cutting action
Available plate travel does not determine how much material the blades can cut. Blade engagement, edge geometry, handle motion and contact forces affect cutting action, and none is calculated from slot clearance alone. The model explains the travel stop rather than providing cutting or maintenance instructions.
Historical multiple-bladed sheep-shears questions
Is this a powered comb-and-cutter handpiece?
No. The cited drawing shows two sliding plates on spring-connected handles.
What limits the relative plate motion?
A screw fixed through a slot limits the available sliding interval in the depicted mechanism.
Does the calculator predict cutting performance?
No. It reports only declared geometric travel.
Historical shears references
- The Century Dictionary, multiple-bladed sheep-shears entry: labels the coiled-spring handles, sliding plates, screw working in a slot and blades.
- Gardner D. Hiscox, Mechanical Movements, Multiple Bladed Sheep Shears: period technical compilation reproducing the named mechanism.
- Florida Center for Instructional Technology, Multiple-Bladed Sheep Shears: accessible reproduction and transcription of the historical labeled drawing.
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.