Mainspring: Ideal Elastic-Strip Bending Estimate

← Back to Engineering Library

A mainspring stores energy as a coiled strip winds around an arbor inside a barrel. Explore that arrangement and compare ideal strip torque, winding angle and stored energy under a uniform elastic-bending assumption.

Ideal Elastic-Strip Mainspring Estimate

Enter strip length, width, thickness, assumed peak elastic surface strain and an independently chosen averaging time. Results are ideal bending values, not a real watch power-reserve or delivered-power prediction.

0°

Ideal peak torque
--
Ideal stored energy
--
Ideal angular wind
--
Energy / entered time
--

Equation Used

T=E eps b t^2/6; theta=2 eps L/t; U=T theta/2=E eps^2 b t L/6; N=theta/(2 pi); P_avg=U/h
E is fixed at 200 GPa. The strip is treated as a straight, uniform rectangular beam bent to constant curvature from a zero-moment state. Barrel/arbor contact, pre-shape, friction, set, hysteresis, bridle slip, gear train and escapement are excluded.
  • The entered strain is an assumed elastic surface strain and remains uniform along the active strip.
  • Young's modulus is fixed at 200 GPa and the rectangular section is constant.
  • The entered time is only a divisor for ideal stored energy; it does not determine a movement's running time.

The calculation treats the strip as an ideal elastic beam with uniform bending. The barrel animation illustrates winding state; coil contact, manufactured free shape and losses are outside the calculation.

Same mechanism and inputs as the interactive calculator.

Barrel, arbor and elastic strip

A mainspring is a long rectangular strip connected between an arbor and a barrel. Winding changes the strip curvature and stores bending energy; unwinding applies torque to the barrel or arbor, depending on the construction.

The animation is a schematic state view of strip transfer between barrel and arbor. It does not solve coil contact, pre-shape or detailed curvature.

Ideal dimensional sensitivity only

Use the calculator to inspect the stated uniform-bending model: width enters linearly, thickness strongly affects torque, and length changes angular wind and stored energy. It cannot select a spring, predict a watch's running time, or establish safe strain.

Uniform rectangular-strip model

T=E eps b t2/6; theta=2 eps L/t; U=T theta/2

These relationships follow from rectangular-section bending stress and the linear torque-angle model T=(Ebt3/12L)theta. The screen fixes E=200 GPa. The entered averaging time gives U/h only.

Arithmetic example

For L=300 mm, b=1.0 mm, t=0.10 mm, eps=2% and h=40 hours, the ideal model gives 6.67 mN m peak torque, 19.1 revolutions of angular wind, 0.40 J stored energy and 2.78 microwatts for energy divided by the entered time. These are not movement ratings.

Model boundary

A real mainspring requires material data, manufactured free shape, barrel and arbor geometry, coil contact and friction, fatigue, set, bridle behavior, gear-train and escapement losses, plus testing.

Mainspring model questions

Does the averaging-time input predict power reserve?

No. It only divides ideal stored energy by a user-entered time.

Is 3% strain safe for every mainspring?

No. The slider is a model input, not an allowable limit; use validated material and manufacturer data.

Why does thickness have a strong effect?

For a given assumed surface strain, ideal torque scales with t squared, while angular wind scales inversely with t.

Primary references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: