The historical Lancaster turbine is described as a downward-discharge water turbine. Water from the surrounding chamber enters through gate plates with a tangential component, meets the vertical upper portions of the rotating runner blades, and then discharges downward.
Lancaster Turbine Interactive Calculator
Explore ideal freshwater power and static head pressure while the animation shows the documented Lancaster flow topology. No efficiency or shaft output is inferred.
Equation Used
- Freshwater density is fixed at 1000 kg/m³.
- Entered head is treated as net head and flow is steady.
- Gate and runner blade shapes are illustrative because dimensions are not supplied.
- No efficiency, velocity-triangle, loss, leakage, cavitation, bearing, structure or generator model.
Water enters the upper blade portions tangentially and discharges downward below the wheel.
Tangential entry and downward discharge
Water in the chamber passes fixed gate plates that direct it tangentially into the vertical upper portions of the runner blades. The runner and its vertical shaft rotate while water continues downward through the wheel and outlet.
Historical topology, not output prediction
The animation identifies the stationary water chamber and gate plates, rotating runner and shaft, and downward discharge. It cannot predict turbine efficiency or shaft output.
Ideal water power
P=rho gQH and static head pressure is rho gH. These are ideal fluid quantities upstream of all turbine losses.
Reading the animation
The surrounding guide plates stay fixed while the runner turns about the vertical shaft. The upper blade portions are vertical and the lower portions curve toward the downward outlet. Arrows show the general water direction, not a calculated flow field.
Blade geometry and model limits
The topology follows figure 489 and its caption in the public-domain Hiscox Mechanical Movements: downward discharge, vertical upper blade portions and tangential receipt from gate plates. Blade count, curvature, guide spacing and casing dimensions are illustrative. Velocity triangles, efficiency, leakage, cavitation, bearing loads and structural strength are not calculated.
Questions
Is this modeled as an outward-flow turbine?
No. The cited historical description says downward discharge.
Is shaft power shown?
No. Only ideal hydraulic power is calculated.
References & Further Reading
- Wikipedia contributors. Water turbine. Wikipedia
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.