A chronometer detent escapement gives the balance one impulse per complete oscillation, or two beats. A release tooth operates a detent through a passing spring in one direction. On the return swing, the light spring yields without releasing the escape wheel. The impulse pallet and unlocking tooth have separate jobs.
Chronometer Escapement · Timing and Tooth Pitch
Explore the single-impulse detent sequence. Change beat rate, tooth count and tip diameter to calculate wheel timing and rim pitch.
Equation Used
- One impulse per full balance oscillation.
- One escape-wheel tooth per release.
- Beat rate is entered, not predicted from spring stiffness.
- Diameter is the tip-circle diameter.
- Timing and tooth-pitch outputs do not specify spring adjustment, repair tolerances or timekeeping accuracy.
Return swing bends the passing spring without unlocking the detent.
One release, one impulse, then a free return
Brown 313 and Hiscox 1188 show a balance arbor above the escape wheel, a single impulse pallet P, a separate release tooth V and a spring detent alongside the wheel. The detent holds a rim tooth while the balance swings freely.
On the impulse swing, V presses the passing spring against the detent. That moves the locking stone clear. The released escape-wheel tooth then pushes P, supplying energy directly to the balance. The detent returns and catches the next wheel tooth.
On the return swing, V bends the passing spring in the yielding direction. The detent remains against its stop E; the wheel stays locked and no second impulse is given. The enlarged diagrams below the main animation distinguish these two actions.
The balance rim and hairspring are shown around the small arbor components. The selected motion sequence explains the source mechanism; it does not simulate an actual spring or determine tooth clearances.
Use the calculator for timing and geometry comparisons
Enter the balance beat rate, escape-wheel tooth count and measured tip diameter. Compare full oscillation frequency, impulses per hour, wheel rpm and rim arc per tooth. These results are kinematic relationships under one tooth released per complete oscillation.
This is a reference for understanding detent escapements and checking a tooth-count calculation. It does not certify a chronometer rate, select a passing-spring thickness or prescribe a repair adjustment.
Two beats per complete oscillation
Let B be beats per hour, N the escape-wheel tooth count and D its tip diameter in millimetres. Full oscillation frequency is f=B/7200 Hz and period is T=7200/B seconds. One impulse per full oscillation gives I=B/2 impulses per hour.
With one tooth released per full oscillation, escape-wheel speed is n=B/(120N) rpm. Angular pitch is 360/N degrees. Rim arc per tooth is s=πD/N millimetres, and time-averaged rim speed is v=πDn/60=s f millimetres per second.
The wheel moves intermittently; v is not its instantaneous speed during impulse. The animation uses an explicitly selected release interval and enlarged contact geometry. The calculator does not infer torque, spring stress, lock depth or timekeeping accuracy.
14,400 beats per hour and 15 teeth
The balance completes 2 full oscillations each second, with a 0.5-second period. It receives 7,200 impulses per hour. A 15-tooth escape wheel advances 24° each release and turns at 8 rpm.
For a 12 mm tip diameter, rim arc per tooth is about 2.513 mm and time-averaged rim speed is 5.027 mm/s. Doubling beat rate doubles impulse rate and wheel rpm, while halving period. Increasing diameter changes the linear pitch and rim speed without changing the timing.
Keep the two spring functions distinct
The detent provides locking; the lighter passing spring provides directional release. The impulse pallet supplies the balance with energy during one swing direction. The balance receives only one impulse in a complete oscillation.
The illustration explains the operating sequence. Its enlarged contacts do not specify manufacturing dimensions or spring adjustments. Assessing accuracy, shock response and elastic behavior requires the geometry and operating data of a particular movement.
Chronometer escapement questions
Does every beat give an impulse?
No. In this detent arrangement one complete oscillation contains two beats and receives one impulse.
Why does the return swing not unlock the wheel?
The passing spring yields in that direction without moving the detent from its stop.
Does tooth count affect balance rate?
The rate is an entered value here. Tooth count sets wheel speed for that rate; it is not an oscillator calculation.
Can these timing results predict timekeeping accuracy?
No. Beat rate is entered rather than predicted. Accuracy also depends on the actual oscillator, drive, geometry and operating conditions, which are not modeled here.
Are the displayed profiles build-ready?
No. The contact sequence and enlarged spring motion explain the mechanism; no manufacturing clearance or stress analysis is supplied.
Primary references
Henry T. Brown, Five Hundred and Seven Mechanical Movements, no. 313: release tooth V, passing spring, detent stop E and single impulse pallet P. Gardner D. Hiscox, Mechanical Movements, Powers, Devices and Appliances, no. 1188, printed page 292, describes the same directional release and locked return.
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.