The FIRGELLI Industrial Linear Actuator is built for the toughest environments, delivering up to 2,200 lbs (10,000 N) of force with IP66 environmental protection. Featuring integrated limit switches and Hall-sensor feedback, this unit is engineered for rugged reliability in outdoor, agricultural, and industrial automation applications.
For basic operation, simply use the standard 2-wire hookup — the actuator will stop automatically at each end of travel thanks to the built-in limit switches. The included Hall sensor wires are optional and allow for precise position monitoring if required.
Download Brochure here
Features and Benefits
- Massive Force Output: Capable of pushing/pulling up to 2,200 lbs (10,000 N).
- IP66 Rated: Dust-tight and resistant to powerful water jets, making it ideal for harsh outdoor conditions.
- High-Precision Feedback: Built-in Hall sensor (0.049mm per pulse) included on all units for optional synchronization or position control.
- Built-In Limit Switches: Internal non-adjustable switches automatically shut off the motor at full extension and retraction to protect equipment.
- Ball-Screw Drive: Provides higher efficiency, speed, and durability compared to standard lead screws.
- Wide Temperature Range: Operates reliably from -40°C to +65°C (-40°F to 150°F).
- Stroke Options: Available in increments from 10" to 40".
- Maintenance-Free: Sealed design requires no ongoing maintenance.
- Accessories: Compatible with MB-18 Brackets, Rocker Switches, and Remote Controls.
*Wiring Note: Connect the two heavy-gauge wires to a DC power source (12V or 24V depending on model) to extend; reverse polarity to retract. The smaller gauge wires are for the Hall Sensor feedback (optional).
| Spec | Value |
|---|---|
| Dynamic Force | 2,200 lbs (10,000 N) |
| Static Force | 3,500 lbs (15,558 N) |
| Input Voltage | 12 VDC or 24 VDC |
| Speed (No Load) | 0.5" (13mm) per second |
| Speed (Full Load) | 0.29" (7.5mm) per second |
| Gear Ratio | 40:1 |
| Duty Cycle | 25% at full load (Higher duty cycle available at lower loads) |
| IP Rating | IP66 (Dust & Water Jet Resistant) |
| Operating Temp | -40°C to +65°C |
| Feedback | Hall Sensor (0.061mm per pulse) |
| Mounting Holes | 0.51" (13mm) diameter. Fits MB18 Brackets |
| Wire Length | 1.5m (Tinned bare wires) |
| Overload Protection | Built-in electrical overload protection |
| Stroke | Retracted (Hole-to-Hole) | Extended (Hole-to-Hole) |
|---|---|---|
| 10" | 18" (457 mm) | 28" (711 mm) |
| 15" | 25" (625 mm) | 40" (1016 mm) |
| 20" | 30" (762 mm) | 50" (1270 mm) |
| 25" | 37" (940 mm) | 62" (1575 mm) |
| 30" | 42" (1067 mm) | 72" (1829 mm) |
| 35" | 49" (1245 mm) | 84" (2134 mm) |
| 40" | 54" (1372 mm) | 94" (2388 mm) |
