Verge Escapement: Crown-wheel Illustration and Input Comparison

← Back to Engineering Library

A verge escapement pairs a crown wheel with pallets carried by the verge. Explore that arrangement alongside a simple assumed tooth-release count and angle comparisons. The diagram does not solve contact between teeth and pallets.

Verge Escapement Interactive Calculator

Enter crown-wheel tooth count, wheel speed and a pallet-direction separation. The result is an arithmetic calculation under a one-tooth-per-beat assumption—not a contact, impulse, lock, recoil or clock-performance analysis.

0°

Assumed tooth-release rate
--
Angle above 90° reference
--
Signed difference from 105°
--
Piecewise display score
--

Equation Used

assumed beats/min=N×rpm; angle above 90=max(0,alpha-90); signed 105 difference=105-alpha; display score=12(95-alpha) below 95, 0 from 95 through 100, 20(alpha-100) above 100 through 105, and 80+10(alpha-105) above 105, clipped to 0–100.
The 90, 95, 100 and 105 degree values are arbitrary comparison references. They do not establish pallet geometry, lock limits, impulse limits or risk thresholds.
  • One crown-wheel tooth release is assumed to correspond to one reported beat.
  • Entered tooth count is rounded to an integer and entered wheel speed is nonnegative.
  • The entered angle is treated only as a direction separation for the displayed arithmetic.
  • No pallet width, tooth shape, contact point, depthing, lock, draw, drop, impulse, recoil, inertia, friction, pendulum or foliot dynamics, accuracy, wear, strength or safety is modeled.
Watch the Verge Escapement in motion
Video: Explanation, how verge escapement works by Horloger de la Croix Rousse on YouTube. Used here to complement the diagram below.
Same mechanism and inputs as the interactive calculator.

Crown Wheel and Verge

British Museum records describe verge escapements with a crown wheel and a verge between its supports, and a turret-clock example pairs the crown wheel with a foliot. Those sources establish the historical topology. This calculator does not reconstruct the tooth-and-pallet contact geometry.

What This Calculator Represents

The count result assumes one reported beat per tooth release. The angle outputs compare the entered separation with fixed references at 90 and 105 degrees. The piecewise score is an arbitrary illustrative function, not a measure of escapement quality or risk.

Explicit Input calculation

assumed beats/min=N×rpm
angle above 90°=max(0,alpha-90°)
signed 105° difference=105°-alpha
display score=12(95-alpha), alpha<95°
=0, 95°≤alpha≤100°
=20(alpha-100), 100°<alpha≤105°
=80+10(alpha-105), alpha>105°, clipped to 0–100

The angle outputs are software definitions, not measured escapement events.

Arithmetic Example

For 15 entered teeth, 2 rpm and a 100 degree direction separation, the assumed count is 30 beats per minute, the angle above 90 is 10 degrees, the signed difference from 105 is 5 degrees and the piecewise display score is 0.

Assumptions and Limits

  • Calculated: one assumed count product and three transparent angle-based arithmetic definitions.
  • Illustrated: crown-wheel and two pallet-direction topology cues.
  • Not calculated: tooth contact, pallet face geometry, depthing, lock, draw, drop, impulse, recoil, restoring oscillator, rate accuracy, torque, efficiency, friction, wear, structure or safety.

Frequently Asked Questions

Does the score predict lock risk?

No; it is only the stated piecewise display function.

Is angle above 90 an impulse arc?

No; no contact geometry is solved.

Is the 105-degree difference a lock margin?

No.

Why multiply teeth by rpm?

The page explicitly assumes one reported beat per tooth release.

Does this model a pendulum or foliot?

No.

Can it design or rate an escapement?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: