Sectional Spur Gear: Ideal Advance and Dwell Fractions

← Back to Engineering Library

A partially toothed sector wheel can drive a mating pinion while its teeth are engaged and leave the pinion stationary during the toothless portion when a separate locking feature is provided. The angular calculation follows the ideal spur-gear ratio only during engagement.

Uniform Speed of Sectional Spur Gear Interactive Calculator

Enter the toothed-sector sweep and an ideal driver-equivalent-to-pinion tooth ratio. Results describe engaged-mesh angle and cycle fractions only—not transition impact, locking geometry, torque, accuracy or a machine rating.

0°

Ideal engaged output advance
--
Complementary driver sweep
--
Entered drive share
--
Complementary dwell share
--

Equation Used

ideal output advance=sector sweep times entered tooth ratio; complementary sweep=360 degrees-sector sweep; drive share=100 sector sweep/360 degrees; dwell share=100-drive share.
The ratio is interpreted as equivalent full driver tooth count divided by pinion tooth count for an ideal external involute pair during mesh. Output direction is opposite but the displayed advance is a magnitude. A toothless interval alone does not lock the output.
  • The sector teeth and pinion are treated as a compatible ideal external spur-gear pair during engagement.
  • The entered ratio is Ndriver-equivalent/Npinion and is positive.
  • The input completes one 360-degree turn; the entered sector sweep is the nominal engaged interval.
  • A separate locking feature is required to hold the output during the toothless interval; its geometry is not calculated.
  • Entry and exit transients, backlash, tooth interference, contact ratio, force, torque, inertia, impact, stress, deflection, wear, lubrication, accuracy, speed limits and safety are omitted.
Same mechanism and inputs as the interactive calculator.

Toothed Sector, Pinion and Separate Dwell Lock

U.S. Patent 4,147,014 describes a sector wheel that engages a pinion to create intermittent rotation. A stop plate on the toothless portions engages a complementary pinion plate to stop inertial rotation and lock the output during the gap. French patent FR2512908A1 likewise describes alternating engagement and disengagement with an arc-shaped locking rib and mating groove.

The animation distinguishes the nominal toothed interval from dwell. It does not claim that missing teeth alone restrain the pinion.

What This Calculator Represents

During ideal spur-gear engagement, angular displacement magnitude scales by the equivalent driver tooth count divided by the pinion tooth count. The tool applies that entered ratio to the entered sector sweep.

It also subtracts the sector sweep from one driver turn and reports both cycle fractions. It does not solve the transition or lock.

Ideal Engaged-Mesh Angular Advance

ideal output advance magnitude = entered sector sweep × Ndriver-equivalent/Npinion
complementary driver sweep = 360° - sector sweep
drive share = sector sweep / 360° × 100%
dwell share = complementary sweep / 360° × 100%

Worked Ideal Example

For a 120° toothed sector and entered equivalent driver/pinion tooth ratio 3, ideal output advance magnitude during engagement is 360°. The remaining driver sweep is 240°, so the nominal drive and dwell shares are 33.3% and 66.7%.

Model Boundary

  • Calculated: ideal engaged angle magnitude and nominal driver-cycle fractions.
  • Illustrated: a partial-tooth driver, full pinion and separate conceptual lock.
  • Not calculated: exact tooth counts, module, center distance, contact ratio, end-tooth transition, backlash, locking geometry, impact, load, torque, stress, deflection, inertia, accuracy, wear, lubrication, speed or safety.

Frequently Asked Questions

Does the pinion automatically remain fixed when teeth disengage?

No. A separate lock or restraint is required.

Is the output direction shown by the positive advance?

No. It is a magnitude; an external pair reverses direction.

Does the entered ratio define actual tooth counts?

No. It is only their entered quotient.

Is output speed uniform at engagement and disengagement?

The calculator does not model those transitions.

Are backlash and contact ratio included?

No.

Can this size or rate a sectional gear mechanism?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: