Mechanisms — friction drive

Recent Blogs

Cone-on-cone Rolling Pair diagram
Cone-on-cone Rolling Pair Mechanism: How It Works, Parts, Formula and Uses Explained
Explore ideal rolling cones with a shared apex. Compare cone angles, shaft angle and speed ratio, with apex offset shown as a separate length comparison.
Round-rope Drive diagram
Round-rope Drive Mechanism: How It Works, V-Groove Wedge Friction, Parts and Uses Explained
Round-rope Drive explained — how rope-and-grooved-pulley power transmission works, the math behind it, and real applications from textile mills to mine haulage.
Frictional Rectilinear Motion diagram
Frictional Rectilinear Motion Mechanism Explained: How It Works, Diagram, Formula & Uses
Frictional rectilinear motion transmits power through pressed surfaces sliding in a straight line. See how it works, formulas, and real industrial uses.
Cone-and-disk Variable Speed diagram
Cone-and-disk Variable Speed Mechanism: How It Works, Diagram, Parts, Formula and Uses
Explore a cone-input friction drive. Move the disk contact point and compare contact radius, output speed and ideal torque ratio.
Combination of Friction Gear diagram
Combination of Friction Gear Mechanism: How It Works, Diagram, Parts, Formula, and Uses Explained
Compare three friction-wheel diameters and their ideal speed ratios. See why the idler changes its own speed and shaft spacing while the final ratio stays...
Grooved Friction Gearing diagram
Grooved Friction Gearing: V-Groove Force Calculator | FIRGELLI
Resolve normal force on each flank of a symmetric V-groove from radial load and half-angle. Includes a worked example and clear limits on traction and...
Friction Gear diagram
Friction Gear: Contact Torque and Load Comparison | FIRGELLI
Calculate a friction-wheel torque limit from coefficient, normal force and driven radius, then compare it with load torque. Explore rolling-contact motion.
Conical Drum Variable Rotary Roller diagram
Conical Drum Variable Rotary Roller Mechanism Explained: How It Works, Diagram, Parts and Uses
Compare two friction-roller contact positions on a conical drum. Calculate relative speed ratios and check whether each contact lies within the drum ends.
Motion by Rolling Contact diagram
Rolling Contact: Ideal No-Slip Cylinder Ratio and Travel
Calculate the ideal ratio, opposite follower rotation, surface travel and center distance of two externally tangent cylinders rolling without slip.
Friction-clutch Wheels diagram
Friction-clutch Wheels: Torque Threshold and Demand | FIRGELLI
Compare ideal wheel-contact torque with load demand using coefficient, normal force and radius. Understand margin, demand excess and the limits of slip modeling.
Friction Gearing (form) diagram
Friction Gearing: Driver Torque and Utilization | FIRGELLI
Compare a driver-shaft friction torque limit with demand using normal force, coefficient and driver radius. Keep driver and follower torque distinct.
Evans Friction Cones diagram
Evans Friction Cones: Ring-Belt Ratio Calculator | FIRGELLI
Move a leather ring between opposed friction cones and compare mean contact diameters and ideal speed ratio. Finite ring width introduces slip.
Brush Wheels (friction) diagram
Brush Wheels (friction) Mechanism Explained: How It Works, Parts, Formula, Diagram & Uses
Explore bristle contact in an illustrative brush-wheel belt drive. Compare assumed friction-force and torque capacity, wheel power and slip loss.
Capstan (form) diagram
Capstan (form) Mechanism Explained: How It Works, Eytelwein Equation, Diagram and Uses
Explore rope contact around a vertical capstan and the ideal limiting tension ratio. Adjust tail tension, wraps and friction; distinguish the result from equipment capacity.