This calculator compares selected root and tip blade angles and converts selected seconds per revolution to rpm. It does not calculate propeller thrust, torque, power, efficiency, cavitation or vessel performance.
Selected Propeller Blade-Angle Reference
Compare selected root and tip blade angles and convert seconds per revolution to shaft speed.
Equation Used
- Angles use one shared geometric reference convention.
- Rotation time is positive and constant.
- The three displayed blades form a rigid connected visual reference.
- Hydrodynamic inflow, loading, slip, cavitation, stress and performance are excluded.
The section lines are angle references, not solved hydrodynamic blade sections.
Rigid propeller and angle-section reference
The left panel shows a connected three-blade propeller rotating as one rigid body. The right panel shows root and tip section lines at the selected angles against a common reference axis.
The section lines describe selected geometric angles only; they are not airfoil shapes and do not solve inflow or hydrodynamic loading.
What the calculator determines
Select root angle, tip angle and seconds per revolution. Outputs are signed root-minus-tip angle difference, shaft speed, tan(root)/tan(tip), and signed tip-versus-root percentage change.
No diameter, chord, blade area, advance ratio, fluid density or performance coefficient is entered, so no performance result is possible.
Selected angle and speed identities
Δθ = θroot − θtip, N = 60/T, tangent ratio = tan(θroot)/tan(θtip), and tip-versus-root change = 100(θtip − θroot)/θroot.
Selected-input example
For root angle 40°, tip angle 20° and T = 4 s/rev, the signed angle difference is 20°, speed is 15 rpm, tangent ratio is about 2.31, and the tip angle is 50% lower than the root angle.
Scope and design boundary
Blade angle normally varies continuously with radius and must be interpreted with a defined geometric convention. Real propeller analysis requires diameter, chord and section distributions, advance speed, rotational speed, fluid properties and validated hydrodynamic methods or test data.
The former unrelated thrust equation, worked performance example and unsupported material, failure, maintenance and application claims are removed.
Questions
Is tangent ratio a pitch ratio?
No. It is only the ratio of the tangents of two selected angles.
Can the signed angle difference be negative?
Yes, if the selected tip angle exceeds the selected root angle.
Does rotation time determine thrust?
No. It only determines rpm here.
Can this select a propeller?
No.
References & Further Reading
- Wikipedia contributors. Propeller. Wikipedia
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.