Proportional Dividers: Exact Similar-Triangle Scaling

← Back to Engineering Library

This page now covers the documented four-point proportional-divider instrument. It removes the unsupported pivot-slop error estimate and the conflation with a separate string-and-ruler hyperbola tracer.

Proportional-Divider Geometry Explorer

Enter a declared long-side opening, transfer ratio and point-to-point leg length. The connected view keeps two straight equal-length legs crossing at one pivot while reporting exact similar-triangle openings and pivot distances.

0°

Short-side opening
--
Reduction scale factor
--
Short-side pivot distance
--
Long-side pivot distance
--

Equation Used

S=B/r; a=D/(r+1); b=rD/(r+1); a+b=D; b/a=B/S=r
This is exact ideal similar-triangle geometry. It does not estimate manufacturing error, point wear, backlash or transfer accuracy.
  • Both legs are straight and have the same declared point-to-point length D.
  • One ideal common pivot divides each leg into distances a and b.
  • Corresponding point openings are measured between like ends of the crossed legs.
  • The declared ratio r is b/a and therefore B/S.
  • The animation varies opening while preserving straight legs, point-to-point length and the selected pivot ratio.
  • Point shape, clearance, friction, compliance, scale engraving, setup error, wear, accuracy and any hyperbola-tracing linkage are excluded.

Replaces a fabricated pivot-slop error model and unsupported hyperbola-tracer conflation with exact documented proportional-divider geometry.

Four points share one adjustable crossing pivot

The Smithsonian describes proportional dividers as two pointed legs opening in an X, with a screw and nut sliding along the legs to select a proportion. Corresponding openings on opposite sides of the pivot remain proportional because they form similar triangles.

The connected animation preserves two straight equal-length legs and one common pivot.

Use this page to audit ideal transfer geometry

The worksheet converts a long-side opening to a short-side opening and locates the ideal pivot along a declared leg length for a chosen ratio.

It cannot predict point placement accuracy, wear, backlash or any separate hyperbola-tracing mechanism.

Apply the similar-triangle ratio directly

S=B/r; b/a=B/S=r
a=D/(r+1); b=rD/(r+1)

The same ratio applies at every opening while the ideal legs and pivot remain fixed.

A transparent proportional-divider example

For B=200 mm, r=5 and D=400 mm, short opening is 40.00 mm, reduction scale factor is 0.2000, short-side pivot distance is 66.67 mm and long-side distance is 333.33 mm.

No physical accuracy or tolerance follows.

Ideal ratio is not transfer accuracy

Real results depend on point condition, pivot clearance and friction, leg straightness and stiffness, scale engraving, setup, reading and marking technique. Those require instrument-specific measurements or calibration.

The former 0.2 mm accuracy, fabricated slop-error equation, hyperbola-linkage claims, tolerance rules, deployments and maintenance advice are removed.

Proportional-divider questions

Does this instrument itself draw a hyperbola?

The documented four-point proportional dividers transfer scaled distances; no hyperbola tracer is modeled here.

Does pivot slop have a universal error formula?

No.

Why is the ratio independent of opening?

The corresponding triangles remain similar.

Can this predict transfer accuracy?

No.

Proportional-divider references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: