Multiple Ball-Valve Manifold: Independent Quarter-Turn Path States

← Back to Engineering Library

Each ball in this illustrated valve bank controls its own two-port path. Rotate the straight bores between open and isolated positions, then count endpoint paths and compare an illustrative bore-to-bore envelope.

Independent Ball-Valve Endpoint Calculator

Choose a declared number of independent ball elements and how many are commanded open. The worksheet counts open and isolated endpoint paths, external port ends and a simple declared centerline envelope. It does not size, rate or select a valve.

0°

Open endpoint paths
--
Isolated endpoint paths
--
External two-port ends
--
Declared centerline envelope
--

Equation Used

Kopen=min(Kcommand,N); Kclosed=N-Kopen; external ports=2N; declared envelope=d+(N-1)P
Open means a straight bore aligned with its two ports; isolated means that bore is perpendicular at the depicted endpoint. Intermediate animation frames are transitions, not additional rated flow states.
  • The declared manifold contains independent straight-bore two-port ball elements.
  • Each open endpoint connects its own left and right port; each closed endpoint rotates that bore perpendicular.
  • Pitch and bore diameter are illustrative declared dimensions used only for the envelope and drawing.
  • Pressure, temperature, Cv, leakage, torque, seats, materials, wall thickness, actuation, certification and service suitability are excluded.

At the commanded endpoint, each aligned bore connects one pair of ports. The calculator counts these paths and reports an illustrative span from bore diameter and center pitch.

Each ball creates a configuration-specific path

A ball valve uses a bored sphere that rotates between endpoints. In the declared two-port model, a bore aligned with both ports is open and a bore turned perpendicular is isolated. Real multiport balls may use L, T, H, HL or other passages, so their actual routing must be read from the selected manufacturer's flow-path diagram.

The animation keeps every ball centered and cycles the commanded-open elements between perpendicular and aligned bores. The result tiles report the commanded endpoint, while intermediate frames illustrate transition rather than throttling performance.

A topology and selection-diagram reference

The calculator counts the selected independent endpoint paths and port ends before consulting a real product's configuration diagram. It does not establish that a custom block can replace a given piping assembly.

Declared endpoint counts and envelope

Kopen=min(Kcommand,N); Kclosed=N-Kopen; ports=2N; envelope=d+(N-1)P

The envelope is only the span from one illustrative bore edge to the opposite edge using declared center pitch. It is not a valve-body dimension.

Four-element endpoint example

For four declared elements with three commanded open, the endpoint has three open paths, one isolated path and eight external port ends. With d=12 mm and P=45 mm, the declared centerline envelope is 147 mm.

Connection states and valve selection

An endpoint connection map shows which ports connect, but it does not establish leakage, flow capacity, actuation torque or valve-body dimensions. Selecting a valve requires the actual passage configuration and manufacturer ratings for the fluid and operating conditions. The illustrative envelope here excludes body walls, seats and fittings.

Multiple ball-valve questions

Does every multiple-ball valve have this flow path?

No. This page deliberately models independent straight-bore two-port elements. Multiport products use configuration-specific drilled passages.

Does an isolated drawing prove zero leakage?

No. It indicates only the ideal endpoint connection state.

Can this calculate Cv or pressure drop?

No; those require product-specific geometry and verified manufacturer data.

Ball-valve references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: