Movable Pulley with Counterweight: Exact Balance and Travel Ratio

← Back to Engineering Library

A counterweight tensions one rope routed beneath a load-carrying pulley and over a fixed pulley. For two vertical supporting legs, the ideal counterweight is half the moving load and moves twice as far in the opposite direction.

Movable Pulley and Counterweight Calculator

Enter a declared moving load, counterweight trim from the ideal half-load value, and selected load rise. The worksheet reports ideal line tension, counterweight mass, two-to-one counterweight travel and block imbalance. It does not rate or approve a real lifting system.

0°

Ideal line tension
--
Selected counterweight
--
Counterweight fall
--
Net block imbalance
--

Equation Used

T=C; ideal C=W/2; counterweight fall=2y; block imbalance=2T-W
Mass values are shown as kilogram-force equivalents in this quasistatic ideal model. Rope mass, pulley mass, friction, inertia, shock, guides and brakes are excluded.
  • One massless inextensible rope runs through the entire illustrated path.
  • Ideal sheaves make rope tension uniform.
  • The movable block is supported by two vertical rope legs.
  • Capacity, safety factor, friction, dynamics, compensation and operating procedures are excluded.

The ideal vertical-leg model balances the load with a counterweight of W/2. A load rise of y requires counterweight travel of 2y; changing the counterweight changes the calculated imbalance.

One rope couples the moving block and counterweight

The rope is fixed at the left anchor, passes under the load-carrying movable pulley, rises over the fixed head pulley and ends at the counterweight. In the ideal model, the counterweight sets uniform tension T=C.

Two rope legs support the moving block, so equilibrium requires W=2T and therefore C=W/2. If the load rises by y, both supporting legs shorten by y; the counterweight leg must lengthen by 2y to preserve rope length.

A topology and balance study

This calculator demonstrates the ideal equilibrium of a movable pulley supported by two vertical rope legs. Real counterweight machinery requires configuration-specific engineering, rated components, guides, brakes, inspection and operating procedures outside this page.

Equilibrium and constant-rope-length constraints

T=C; Cideal=W/2; counterweight fall=2y; block imbalance=2T-W

Ideal balance example

For a declared 200 kgf moving load, ideal line tension and counterweight are 100 kgf-equivalent. A 1 m load rise requires 2 m of counterweight fall. A counterweight trimmed 5% low is 95 kg and leaves a -10 kgf block imbalance.

Balance and displacement are linked

The counterweight sets the ideal rope tension. Two vertical legs apply twice that tension to the load, while their combined length change makes counterweight travel twice the load travel. The animation prescribes motion; a nonzero imbalance does not calculate acceleration or predict uncontrolled movement.

Counterweighted movable-pulley questions

Why is the ideal counterweight half the load?

The counterweight sets T, while two rope legs provide 2T upward on the moving block.

Why does the counterweight move twice as far?

A load rise shortens each of two supporting legs by the same amount, so the single counterweight leg lengthens by their sum.

Is this a rigging design?

No.

Counterweighted pulley references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: