TV Lifts Firgelli Robots Linear Slides Makezilla CA Site

TVL-180 Series - Pop-Up TV Lift

TVL-180 Series - Pop-Up TV Lift

Firgelli Automations

$600.00 $790.00
Stroke

Share:

Our Pop Up TV Lifts are suitable for home automation projects where you would like to keep your TV hidden out of sight, perhaps in a wall or cabinet, yet still be able to view it at the push of a button

Model: FA-TVL-180-XX

 

 

FA-TVL-180-30

FA-TVL-180-36

FA-TVL-180-40

Stroke

30”

36”

39”

Retracted Length

24.02”

28.35”

31.89”

Extended Length

54.02”

64.35”

70.89”

TV Sizes

25” – 60”

Input Voltage

110 VAC 

Force

135 lbf.

Lifting Speed

1.2”/second (no load)

Duty Cycle

10%, max 2 min. continuous use

Operating Temp.

+5° C - +40° C

Overload Protection

Built-In

Material

Powder Coated Steel

Additional Features

Adjustable Height

TVL-180 Bracket DimensionsTo download the instruction manual for the FA-TVL-180 TV Lift, please click here

TVL-180 Lift Dimensions

Coming Soon! 

  1. When the unit stops  and if the red light on the control box flashes, it indicates overload or “time protection”.The lift cannot be operated up/down continuously for more than 2 minus, if it is, then it goes into “time protection” mode and needs a reset or a 20 mins wait time.

  2. The red and black buttons on the control box are only for setting the limits of the lift travel: black-lower, red –upper. Once set you don’t touch them unless you press “reset” on the wired manual control switch.

  3. To set the limits: Press the red button on the control box and the UP button on the handset simultaneously for 10 seconds . Release both the buttons when it reaches the height you want it to be max height.Similarly  for the black button: this sets the lower limit.

  4. Wireless remote pairing:Press the STUDY button on the hand wired control and any button on the wireless remote . The led on the hand wired will flash and go off, release both. The remote should now work. Two buttons must be pressed together to make the Lift move. You must press both COM and either UP or Down on the wireless  remote.