Engineering essentials

What Does an Electrical Engineer Do?

See how engineers turn electrical energy and signals into reliable products, machines and infrastructure.

Illustration of an electrical engineer testing a circuit board and motor with an oscilloscope.

The short answer

An electrical engineer designs, analyzes, tests and improves systems that use electrical power or signals. Depending on the role, that may mean a building's power distribution, a motor controller, a sensor circuit, communications equipment or an electronic product. The work includes defining requirements, calculating electrical loads, selecting components, drawing schematics and testing performance. Engineers also consider heat, interference, faults, manufacturing and maintenance so a system behaves predictably in its intended conditions.

What electrical engineers are responsible for

Think about an automatic door. Electrical power must reach the motor, a controller must decide when to move it, and sensors must detect position and people. Someone must determine how those parts connect, how much current they draw and how the system responds to a failed sensor or interrupted supply.

Those are electrical engineering questions. The Bureau of Labor Statistics profile covers the design, development and testing of electrical and electronic equipment. Within that broad description, individual jobs can be very different.

An engineer designing a substation works at a different scale from someone developing a hearing-aid circuit. Both must understand voltage, current, energy and the behavior of components. Neither job is simply “working with wires.”

Electrical, electronics, power and controls: what is the difference?

Area Typical question Example output
Power systems How can energy reach the load with suitable protection and acceptable voltage drop? A distribution design and protection study
Electronics How can a circuit measure, amplify or process a signal? A schematic, circuit board and test results
Motor drives and power electronics How can electrical power control motion efficiently? A drive circuit, thermal design and operating limits
Controls and automation How should a machine respond to sensors and commands? A control architecture and verified response
Communications and radio frequency Can information be transmitted reliably through noise and interference? A radio system, antenna design or signal analysis
Instrumentation How can a physical quantity be measured accurately? A sensor interface and calibration method

The boundaries overlap. A battery-powered instrument can involve analog electronics, embedded software, power management and mechanical packaging. Job descriptions often reveal more than the title alone.

For a wider view of how these disciplines fit together, start with what engineering is and what engineers do.

How an electrical engineering project develops

  1. Define performance. Establish the supply, operating environment, functions, accuracy, speed, reliability and cost targets.
  2. Choose an architecture. Decide how power, sensors, control and communications will connect.
  3. Calculate and select. Check currents, voltage margins, losses, component ratings and fault conditions.
  4. Document the design. Produce schematics, interface definitions, circuit-board layouts or installation drawings.
  5. Build a prototype. Bring up individual functions in a controlled sequence rather than powering an untested assembly and hoping.
  6. Test against requirements. Measure the actual behavior over the specified supply, load and environmental ranges.
  7. Release and support. Resolve manufacturing issues, document tests and investigate problems found in service.

For example, a sensor may behave perfectly on a quiet bench but become erratic when a nearby motor starts. The engineer has to identify whether the problem is supply disturbance, electromagnetic interference, wiring, grounding or software timing. Changing parts at random is an expensive substitute for measurement.

A worked example: powering a small motorized mechanism

Suppose a hypothetical DC mechanism operates at 24 V and draws 5 A during a steady part of its travel. At that operating point, its electrical input power is:

Electrical power = voltage × current = 24 × 5 = 120 W

If it runs for 15 minutes in each hour during an eight-hour shift, it operates for two hours total. Assuming a constant 120 W while running and ignoring standby consumption, the energy calculation is:

Energy = power × running time = 120 × 2 = 240 Wh

These are illustrative design inputs, not ratings for a particular FIRGELLI actuator. A battery would need additional allowance for its usable capacity, conversion losses, temperature, aging and the rest of the equipment. The motor's permitted duty cycle must also be checked.

The supply cannot be selected from steady current alone. Startup and stall current may be higher, and simultaneous motors may change the peak demand. The engineer checks the actual motor data and load profile, then coordinates the driver, wiring, connectors and protection.

Finally, 120 W of electrical input does not tell you the mechanism's thrust. Motor efficiency, gearbox losses, screw lead and speed affect the mechanical output. The mechanical engineer and electrical engineer must agree on the real load and motion requirements.

Another everyday example: why cable resistance matters

Consider a low-voltage circuit carrying 5 A through a total outgoing-and-return resistance of 0.2 Ω. The cable voltage drop is V = I × R = 5 × 0.2 = 1 V. Its heating loss is P = I² × R = 25 × 0.2 = 5 W.

If current doubled to 10 A while resistance stayed the same, the drop would become 2 V and the cable loss 20 W. Twice the current produces four times the resistive heating in this simplified case.

This explains why an engineer checks the complete current path, including connectors, rather than only the nominal supply voltage. A motor may perform poorly because too little voltage reaches it under load.

These calculations do not select a safe cable size. That decision also depends on insulation, installation, ambient temperature, allowed temperature rise and applicable requirements. For learning, explore voltage, current and resistance in the FIRGELLI calculator library; mains installations require the appropriate qualified people and local rules.

What does an electrical engineer do each day?

A day may begin with reviewing test data, continue with a schematic change and finish with a discussion about a component that a supplier can no longer provide. In a site-based role, the day may instead include equipment inspection, commissioning and investigating a protective device that operated unexpectedly.

The O*NET electrical engineer profile includes design, technical documentation, coordination and investigation of equipment performance. The balance of design work and hands-on testing changes with the employer and project.

At a laboratory bench, an engineer might compare a measured waveform with the expected switching behavior. At a desk, the same engineer may update the design calculations and explain the finding to firmware and mechanical colleagues.

Good records are essential. A screenshot of an oscilloscope trace needs the measurement point, probe setup, supply voltage, load and time scale to be useful to someone else.

Tools and skills used in the job

Electrical engineers may use circuit simulation, schematic capture, circuit-board design tools, power-system software, spreadsheets and programming. In the laboratory, common instruments include multimeters, oscilloscopes, power supplies and electronic loads. The correct tool depends on what must be measured.

A multimeter can report a stable average while missing a very short voltage dip that resets a controller. An oscilloscope can reveal that dip, but an unsuitable probe connection can introduce misleading noise. Knowing an instrument's limitations matters as much as reading its screen.

  • Circuit reasoning: following current paths and understanding what establishes each voltage.
  • Mathematics: using algebra, calculus and complex numbers where the model requires them.
  • Programming: automating measurements, analyzing data or developing embedded functions.
  • Component judgment: reading ratings, tolerances, thermal limits and conditions in datasheets.
  • Communication: documenting interfaces and making design decisions understandable.

A strong troubleshooting habit is to change one controlled variable at a time. If replacing the supply, cable and controller together removes a fault, the team still does not know which change solved it.

Electrical engineer, electrician or software engineer?

Electrical engineers focus on designing and analyzing systems and verifying that they meet requirements. Electricians specialize in installing, maintaining and repairing electrical wiring and equipment. Their work overlaps during construction and troubleshooting, but the education, responsibilities and licensing requirements differ.

Software engineers develop the programs and systems that process information and control behavior. An electrical engineer may write code, and an embedded software engineer may understand circuits. On a motor controller, the electrical design must tolerate the expected current while the software decides how to command motion.

Compare software engineering and software engineers' daily work. For physical packaging, cooling and load-bearing parts, compare mechanical engineering. A medical instrument brings these disciplines into biomedical engineering.

Education, experience and professional licensure

A related engineering bachelor's degree is the typical entry route in the United States, according to BLS. Study commonly combines mathematics, physics, circuits, electronics, signals and laboratory work. Electives help students develop toward power, controls, communications or another area.

Check the specific program's ABET accreditation, course content and practical opportunities. A useful project portfolio includes a circuit's purpose, requirements, schematic, calculations, measured results and explanation of a design change.

U.S. PE licensure depends on state rules and the kind of work. NCEES outlines the common education, experience and examination route. Do not assume every electronics development role requires a PE, or that a degree alone authorizes you to offer every electrical engineering service.

Practical experience should be supervised appropriately. Low-voltage, current-limited learning projects are a better starting point than opening mains-powered equipment or experimenting with high-energy batteries.

Career fit and salary

This field may suit you if you enjoy invisible causes producing measurable effects: a voltage change alters a motor's speed, a noisy signal confuses a sensor, or a component's temperature changes its behavior. It requires patience with systems that can seem intermittent until the right test exposes the cause.

BLS reports May 2025 U.S. median annual wages of $120,630 for electrical engineers and $130,220 for electronics engineers, except computer. These are separate occupations; the combined category has a different median. See the BLS pay section and our guide to engineering salaries for the difference between an occupational median and an individual offer.

To explore the work, start with a simple sensor and indicator using a suitable educational kit. Predict what a changing input should do, measure it, and explain any difference. That habit transfers to much larger systems.

What does an electrical engineer produce?

Electrical engineering work must become information that someone can build, inspect, test and maintain. Depending on the role, the result may be a schematic, power calculation, circuit-board design, cable schedule, control specification, test report or installation drawing.

Deliverable Question it answers
Schematic or single-line diagram What connects to what, and what does each circuit do?
Component specification Which ratings and operating conditions must the part meet?
Wiring and connector information How can the intended connections be made and checked?
Test procedure Which measurements demonstrate acceptable operation?
Fault and protection analysis What happens when something goes wrong, and how is harm limited?

For a motorized mechanism, a circuit that works on the bench may still fail in its enclosure. The cable can be longer, the ambient temperature higher, the starting current greater or the connector less accessible. The engineer checks the actual operating arrangement rather than treating the schematic as the complete product.

A fuse is not selected only by matching its number to a motor’s normal current. The current-versus-time behavior, circuit voltage, available fault current, wire protection and device ratings also matter. This is a design task requiring appropriate data and the rules for the installation; the example is not a wiring specification.

Where do electrical engineers work?

Roles exist in power generation and distribution, equipment manufacturing, transport, communications, instrumentation and product development. Some involve laboratories and prototypes, others field commissioning or network planning. Ask whether a vacancy focuses on power, electronics, signals or controls: the shared foundation does not make the daily work identical.

Frequently asked questions

Do electrical engineers work on computers?

Some design computer hardware, power supplies or interfaces, while others use computers mainly as design tools. Electrical engineering also covers power networks, motors, sensors and communications. The specific role matters more than the broad title.

Is electrical engineering the same as electronics engineering?

They overlap. Electrical engineering can include power generation, distribution and machines as well as electronics. Electronics often emphasizes circuits and devices that process signals or control power. Degree and job titles are not perfectly standardized.

Do electrical engineers need programming skills?

Programming is useful for simulations, data analysis, test automation and embedded systems. Some jobs involve substantial code; others emphasize hardware or power-system design. Learn the tools that support the type of system you want to work on.

Do electrical engineers install wiring?

Some participate in commissioning or hands-on development, but installation work is often carried out by electricians and technicians. Engineering design and electrical installation have different responsibilities and may require different local licenses or qualifications.

Can an electrical engineer design a robot?

Yes, particularly its power supply, motor drives, sensors and electrical interfaces. Mechanical engineers design the structure and mechanisms, while software engineers may develop behavior and control. Smaller teams may combine these responsibilities.

Is electrical engineering all advanced mathematics?

No. Advanced mathematics supports important models, but practical work also involves reading specifications, measuring circuits, interpreting failures and communicating decisions. Even an advanced analysis should be checked against units, physical limits and a simpler estimate.

What is a good beginner electrical engineering project?

A low-voltage sensor circuit with a measurable input and output is a useful start. Use a suitable educational supply or kit, predict its response and compare measurements with the prediction. Avoid mains equipment and high-energy battery experiments.

Can electrical engineers work from home?

Some calculations, software work and design reviews can be remote. Laboratory measurements, prototype development, commissioning and site inspections need access to the actual equipment. Hybrid arrangements depend on the position and employer.

Put the idea to work

Explore the relationships between force, motion, geometry, and energy with practical engineering calculators.

Explore engineering calculators

Sources and further reading