Windlass Grip Pawl: Signed Force and Moment Comparison

← Back to Engineering Library

Compare the moment produced by chain pull acting at a signed offset from the reference point. The indicator shows whether that offset is negative; it does not predict whether the pawl will release.

Windlass Grip Pawl Interactive Calculator

Enter chain pull and signed contact offset. The zero/one indicator reports whether the offset is negative. Friction, tooth geometry and self-locking are not analyzed.

0°

Converted force magnitude
--
Signed force-offset moment
--
Entered signed offset
--
Negative-offset indicator only
--

Equation Used

F=9.80665P; M=F e/1000; margin=e; risk=1 when e<0, otherwise 0.
Positive and negative moment follow the entered offset sign. The risk threshold at zero is a calculator convention, not a validated release criterion.
  • One tonne-force equals 9.80665 kN.
  • The entered offset is the signed perpendicular moment arm.
  • Risk is defined solely as offset below zero.
  • No friction coefficient or contact-normal geometry is used.
  • Tooth stress, impact, wear, structure, redundancy and safety are omitted.
Same mechanism and inputs as the interactive calculator.

Signed Pawl Offset Screen

Moment equals force times perpendicular offset. The indicator is one for a negative offset and zero otherwise; it does not model the pawl contact or friction.

What This Calculator Represents

A signed static moment and negative-offset indicator.

Force and Sign comparison

F=9.80665P
M=Fe/1000
margin=e
risk=[e<0]

Worked Scenario

At 12 tonnes-force and -3 mm offset, force is about 117.7 kN, signed moment -0.353 kN m, margin -3 mm and the sign indicator is 1.

Assumptions and Limits

No friction, contact normal, tooth stress, impact, wear or safety proof is included.

Frequently Asked Questions

Does risk=1 prove ejection?

No.

Does risk=0 prove self-locking?

No.

Is friction included?

No.

Why is moment signed?

The entered offset is signed.

Are stresses checked?

No.

Can this approve a pawl?

No.

References

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: