Six Radial Grooved Trammel Mechanism Explained: How It Works, Parts, Formula and Uses

← Back to Engineering Library

The six-radial-grooved trammel transfers rotation between parallel, offset shafts through three rollers and six radial grooves. The animation shows the connected roller drive. The separate calculator compares equal angular sectors and a user-assumed event rate; those events are not reciprocating strokes.

Six-Groove Trammel and Sector Counts

Watch a three-roller carrier drive a six-groove wheel, and compare separate equal-sector counts.

0°

Equal Sector Pitch
--
Assumed Events per Rev
--
Selected Speed
--
Assumed Event Rate
--

Equation Used

pitch=360/N; rpm=60/T; assumed events/rev=N; assumed rate=N rpm.
The numerical outputs are event-count arithmetic, not groove dimensions, contact forces or reciprocating stroke.
  • Sectors are equal.
  • Revolution time is constant and positive.
  • One abstract event per sector per revolution is an explicit user convention.
  • Groove length and radius, follower and guide geometry, engagement, stroke, closure, collision and safety are excluded.

The wheel keeps six grooves. N changes only the separate count calculation; T sets the illustrated wheel revolution time.

The six-groove drive has fixed proportions; the N control applies only to the separate sector-count calculator.

Six grooves and three rollers

For N equal sectors, angular pitch is 360/N degrees. For selected revolution time T, speed is 60/T rpm. If the user adopts one abstract event per sector per revolution, assumed events per revolution is N and event rate is N times rpm.

The event assumption is a count convention, not proof of a physical trammel stroke.

Use and boundary

Use the calculator to compare equal angular divisions and a selected abstract event rate. Do not use it to size grooves, establish a follower path, calculate stroke or validate engagement and disengagement.

Equal-sector event identities

sector pitch=360/N; rpm=60/T; assumed events/rev=N; assumed event rate=N rpm.

Default selected-value example

For N=6 and T=6 s/rev, sector pitch is 60 degrees, speed is 10 rpm and the selected one-event-per-sector convention gives 60 abstract events per minute.

Rotation between offset shafts

Hiscox figure 1074 places three rollers on a triangular carrier in front of a six-groove wheel. With shaft offset equal to roller orbit radius, the roller centers remain on radial groove lines and the carrier turns twice per wheel revolution. The groove crossing allows each roller to pass through the wheel center. The illustration uses fixed proportions and does not calculate groove contact forces or manufacturing clearances.

Questions

Does one sector guarantee one stroke?

No. It is an explicit abstract event-count assumption only.

Does changing N define a real trammel?

No. Groove and follower geometry must be defined separately.

Is stroke length calculated?

No.

Reference

Gardner D. Hiscox, Mechanical Movements, Powers, Devices and Appliances (1901), page 267, figure 1074: six radial grooved trammel.

References & Further Reading

  • Different trammel construction: Wikipedia contributors. Trammel of Archimedes. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: