Serpollet's Steam Tricycle Mechanism: How the 1887 Flash Boiler Steam Vehicle Works

← Back to Engineering Library

The preserved Serpollet steam tricycle at the Musée des Arts et Métiers represents an early lightweight steam road vehicle. In the selected drivetrain model, engine shaft power passes through a chain reduction to a driven rear-wheel sprocket.

Serpollet Tricycle Ideal Chain-Drive Reference

Explore exact ideal shaft power, torque and speed changes through a selected chain reduction.

0°

Shaft Power
--
Engine Shaft Torque
--
Ideal Driven Torque
--
Ideal Driven Speed
--

Equation Used

PkW=0.745699872Php; Te=1000PkW/(2Ï€n/60); Tw=RTe; nw=n/R.
Ideal steady lossless chain relation only; engine thermodynamics, tooth geometry, chain forces, efficiency, traction and road speed are excluded.
  • Power and engine speed are simultaneous steady shaft values.
  • The chain is lossless and does not slip.
  • Reduction ratio is constant and positive.
  • Thermodynamics, chain sizing, traction, vehicle dynamics and safety are excluded.

Reduction ratio R is driven-sprocket pitch radius divided by driver-sprocket pitch radius.

Ideal engine-to-wheel chain relation

The animation shows an engine shaft, small driving sprocket, two exact common-tangent chain spans and a larger driven rear-wheel sprocket. The entered ratio R is defined as driven-sprocket pitch radius divided by driver pitch radius.

It is a selected ideal drivetrain reconstruction, not a dimensional drawing of the museum vehicle.

What the calculator determines

Select shaft power, engine speed and an ideal reduction ratio. The calculator converts horsepower to kilowatts, derives engine torque from P = Tω, multiplies torque by R and divides speed by R.

Power, torque and ideal ratio

PkW = 0.745699872 Php. With ω = 2πn/60, Te = 1000PkW/ω. For an ideal lossless reduction R, Tw = RTe and nw = ne/R.

Selected-input arithmetic

At 4 hp and 600 rpm, power is about 2.983 kW and engine torque about 47.47 N·m. With R = 3, ideal driven torque is about 142.4 N·m and driven speed 200 rpm.

Model boundary

The model assumes steady shaft power and a lossless chain with a constant pitch-radius ratio. It excludes engine thermodynamics, steam flow, boiler performance, sprocket tooth counts and pitch, polygonal action, chain mass, tension, efficiency, bearings, wheel diameter, traction, vehicle mass, road load, acceleration, braking and safety.

Questions

Does a 3:1 reduction triple real wheel torque?

Only ideally; real losses reduce delivered torque.

Does wheel rpm give road speed?

No. Wheel rolling radius and slip are absent.

Can this size a chain?

No.

References & Further Reading

  • Wikipedia contributors. Léon Serpollet. Wikipedia

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: