A crank-rocker four-bar converts input rotation into bounded angular oscillation when the link lengths, fixed-link choice and assembly branch permit the input side link to rotate continuously while the output side link rocks.
Rocking Motion Interactive Mechanism
Inspect one illustrative crank-rocker four-bar cycle with visible fixed pivots, crank, coupler and output rocker.
How the selected rocking-motion topology works
Two fixed pivots form the frame. A rotating input crank moves one end of a floating coupler; the coupler's other end drives the output rocker about the second fixed pivot. Each pose is the selected intersection satisfying both coupler and rocker lengths.
The animation is a dimensionless, ideal planar reconstruction. It shows topology and one continuous open-branch cycle, not a particular product or a dimensioned design.
What the visual demonstrates
The visual identifies the fixed frame, input crank, coupler, output rocker, moving joints and the rocker's bounded tip arc. A cycle-position control allows the configuration to be inspected without asserting a speed.
It does not calculate dimensions, swing, time ratio, velocity, acceleration, transmission angle, force, torque, stress, motor power, clearance, balance, wear, fatigue or application suitability.
Four-bar closure and rotatability context
For fixed pivots A and D, crank endpoint B(α), coupler length c and rocker length L, the moving joint C must satisfy |C−B|=c and |C−D|=L. The selected animation uses one continuous circle-intersection branch.
For link lengths sorted as shortest s, longest l and remaining p and q, s+l≤p+q is the Grashof condition. Classification also depends on which link is fixed and where the shortest link lies; equality is a change-point case.
Illustrative cycle
The reconstruction uses a source-bounded crank-rocker topology and normalized dimensions chosen only to keep the open assembly visible through one rotation. The rocker tip traces a circular arc because the rocker turns about a fixed pivot.
No dimensions or performance numbers from the visual should be transferred to a real machine.
Scope and correction boundary
CMU, Illinois and Ohio University references distinguish crank, coupler, rocker, Grashof classification, inversion, branch and change-point behavior. Those qualifications replace the article's universal product, tolerance, life, speed and diagnosis claims.
A four-bar can produce useful rocking motion, but detailed design requires the intended path and timing, actual link dimensions, assembly branch, transmission angles, loads, joints, materials, drive and safety constraints.
Questions
Does every Grashof four-bar give this crank-rocker motion?
No. The fixed link and the shortest link's location determine the inversion; equality also introduces a change point.
Does the visual calculate the rocker swing?
No. It is a normalized topology demonstration without engineering inputs or outputs.
Is the moving joint path arbitrary?
No. Each pose is constrained by fixed coupler and rocker lengths on one selected circle-intersection branch.
Can this animation size a motor or linkage?
No. Dimensions, loads, velocity, acceleration, transmission angle, friction, strength and duty cycle are excluded.
Technical references
- Carnegie Mellon University, Planar Linkages — four-bar definitions, crank-rocker inversion and Grashof classification.
- University of Illinois, Four-Bar Linkages — planar four-bar geometry, validity and Grashof quantities.
- Ohio University, Kinematics and Dynamics of Machines — Grashof law, rotatability, change points and branch jumping.
- JPL/DARTS, Analytical Four-Bar Kinematics — analytical position and velocity relationships for a four-bar loop.
Building or designing a mechanism like this?
Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.