Remington-Keene Magazine Rifle: Historical Animation and Display Timing

← Back to Engineering Library

The Remington-Keene was a bolt-action repeating rifle with a tubular magazine beneath the barrel. Explore the broad arrangement in this historical schematic, change the viewing speed and pause on a position. The calculator describes animation timing; it does not reproduce the dimensions or performance of an original firearm.

Remington Magazine Gun Interactive Calculator

Set the viewing-cycle duration and number of abstract markers. The pause input calculates a hypothetical schedule percentage; it does not add a pause to playback.

0°

Display Cycle Frequency
--
Equal Stage Interval
--
Display Cycle Duration
--
Pause Share
--

Equation Used

display frequency = 60/T; equal stage interval = T/4; pause share = 100P/(T + P).
Animation timing only. Values do not represent firing rate, original handling speed, mechanism dimensions or historical performance.
  • The display cycle is divided into four equal educational stages.
  • The pause input affects the percentage result only; playback repeats without that pause.
  • Token count changes the number of inert shapes shown in the tube and does not assert historical capacity.
  • Geometry, operation, repair, ammunition, strength and live-fire performance are excluded.

The companion view shows the same historical schematic and four equal viewing stages. Its stationary markers indicate the magazine location.

Same mechanism and inputs as the interactive calculator.

Historical mechanism overview

Historical descriptions identify this magazine rifle with Keene and place its tubular magazine beneath the barrel. The illustration identifies the receiver, bolt, carrier and magazine by their broad spatial relationship. Its proportions and movements are schematic.

The four labeled viewing stages have equal durations. Their proportions, paths and timing are illustrative, rather than measurements from a historical specimen.

Viewing the historical arrangement

Use the animation to recognize the spatial relationship among the receiver, bolt, carrier and under-barrel magazine in an early repeating-bolt-action design.

For preservation, condition assessment or interpretation of an actual artifact, consult a qualified museum conservator or appropriately licensed specialist. This page intentionally omits disassembly, adjustment, ammunition, firing, fault diagnosis and performance advice.

Illustrative display timing

The entered display-cycle duration T is divided into four equal visualization intervals, so each interval is T/4. The displayed cycle frequency is 60/T cycles per minute. An optional pause P is reported only as a share 100P/(T+P) of a repeated museum-style display schedule.

T sets playback duration. P changes only the calculated pause share; it does not pause playback. The frequency 60/T excludes P. None of these values represents firing rate or historical handling speed.

Default display example

With a 12-second illustrative cycle, each of the four visual stages lasts 3 seconds and the display repeats at 5 cycles per minute. With no pause, the pause share is zero. Six inert tokens are drawn only to make the under-barrel magazine location visible.

Reading the schematic

The Remington-Keene belongs to the bolt-action family. Its under-barrel tube helps distinguish its layout from other historical magazine arrangements.

The colored markers stay in the tube throughout playback. Their count is a display choice, not a capacity claim, and the drawing does not simulate their transfer through the action. Motion paths and equal stage durations are chosen for viewing.

This illustration is not a dimensional drawing or a guide to operating, repairing or restoring a firearm. It does not establish fit, strength, ammunition compatibility or the condition of an actual artifact.

Historical illustration questions

Was the Remington-Keene a rolling-block rifle?

No. It was a bolt-action repeater. The Smithsonian identifies its Remington-Keene carbine as a bolt-action firearm; Remington rolling-block designs are a different family.

Do the four equal stages reproduce the original timing?

No. They divide the animation into four equal viewing intervals. They are not measured historical operating times.

What do the colored shapes show?

They are stationary abstract markers in the tube. Changing their count changes the illustration, not the timing outputs or a historical capacity specification. They do not move through the action.

Does the pause input stop playback between cycles?

No. It calculates the pause percentage for an imagined schedule with cycle duration T followed by pause P. Playback itself repeats every T seconds. Use the Pause animation button to stop it.

What does the display frequency include?

It is 60/T, so it excludes the optional pause. It describes the repeated viewing cycle, not firing rate or historical handling speed.

Can this page guide restoration or operation?

No. This is a historical illustration, not a dimensional drawing or an operating or restoration guide. Have an actual artifact assessed by a qualified specialist.

Historical and technical references

Smithsonian National Museum of American History: Remington-Keene Bolt Action Carbine — museum identification of the bolt-action design.

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: