Ideal Simple Harmonic Motion: Circular Projection

← Back to Engineering Library

Simple harmonic motion is the projection of uniform circular motion onto a diameter. Explore the sinusoidal relationship and calculate position, velocity and acceleration from amplitude, angular frequency and time, starting at maximum positive displacement.

Ideal Zero-Phase SHM Snapshot

Enter amplitude, angular frequency and time for the ideal model x=A cos(omega t). The worksheet reports exact position, velocity, acceleration and phase; it does not predict a real mechanism's loads or response.

0°

Ideal position
--
Ideal velocity
--
Ideal acceleration
--
Circular phase
--

Equation Used

theta=omega t; x=A cos(theta); v=-A omega sin(theta); a=-A omega^2 cos(theta)
A is entered in millimetres, so acceleration is divided by 1000 to display metres per second squared. Initial phase is fixed at zero.
  • Motion is ideal, undamped, unforced simple harmonic motion with zero initial phase.
  • Amplitude and angular frequency are constant and time is measured from maximum positive displacement.
  • Velocity and acceleration are exact time derivatives of the position equation.
  • Mass, stiffness, damping, forcing, resonance, friction, clearance, stress, fatigue, power and safety are excluded.

The circular projection illustrates ideal simple harmonic motion. The animation uses a fixed illustrative scale and playback rate; the numerical snapshot uses the entered amplitude, angular frequency and time.

Uniform circular projection gives exact SHM

OpenStax shows that a point moving uniformly around a circle of radius A has horizontal projection x=A cos(omega t). Differentiating gives v=-A omega sin(omega t) and a=-A omega squared cos(omega t), so acceleration always points opposite displacement.

The animation keeps the rotating radius, projection line and horizontal follower geometrically connected. It is a mathematical construction, not a claim that every reciprocating mechanism follows SHM.

A reference model, not a universal machine law

Ideal SHM is useful as a baseline for oscillators and as the exact projection of uniform circular motion. A mass-spring oscillator follows it only under its ideal assumptions. A finite-rod slider-crank, damped structure, driven machine or nonlinear system generally requires a different model.

Zero-phase simple harmonic motion

theta=omega t; x=A cos(theta); v=-A omega sin(theta); a=-A omega2 cos(theta)=-omega2x

OpenStax lists these position, velocity and acceleration equations and the peak values |v|max=A omega and |a|max=A omega squared.

Declared ideal snapshot

For A=25 mm, omega=6.3 rad/s and t=0.1 s, phase is 36.1 degrees, position is about 20.20 mm, velocity is about -92.8 mm/s and acceleration is about -0.802 m/s2.

No force follows without a declared mass, and no real machine rating follows from this ideal snapshot.

What this ideal model omits

The model excludes initial phase, damping, external forcing, nonlinear stiffness, friction, impacts, finite connecting-rod geometry and structural modes. Its outputs are kinematic identities only.

A real oscillator or mechanism needs an appropriate dynamic model before these motion values can be used to determine forces, response or component ratings.

Simple-harmonic-motion questions

Is every reciprocating mechanism simple harmonic?

No.

Why is acceleration opposite displacement?

Because a=-omega squared times x.

What happens when omega is zero?

Position remains at +A and velocity and acceleration are zero.

Does the calculator include damping or resonance?

No.

Can it size a motor, bearing or structure?

No.

Simple harmonic motion references

Building or designing a mechanism like this?

Explore the precision-engineered motion control hardware used by mechanical engineers, makers, and product designers.

← Back to Mechanisms Index
Share This Article
Tags: