Bullet Series 36 Cal. Linear Actuators

      Bullet Series 36 Cal. Linear Actuators

      Model #
      qty limit cart limit
      In Stock


      Warranty Plus

      Warranty Plus:
      Your product will be replaced (including free shipping) with a new one within 12 months of purchase, even if it is damaged due to improper wiring, incorrect usage, a problem in the electrical installation or any other circumstance.

      Standard Warranty:
      12 month warranty comes with every purchase. Covers malfunctions when it is used within the described conditions/limits.


      Bulk Discount

      Save on your order when purchasing our Actuators in large volumes. Discount will be calculated at checkout.

      Min. Quantity Discount
      11 20 % OFF
      31 25 % OFF
      50 30 % OFF
      200 40 % OFF

      Shipping Cost Estimator

      Note: You must have items in your cart already before you can see the estimated costs to ship your cart. This shipping tool will estimate the total shipping cost for your entire basket.

      -Tech Drawing


      The Bullet Series 36 Cal. Linear Actuator was developed to have a slim in-line motor design. Includes built-in hall effect sensor, which allows for synchronization, position and speed control. The Hall effect feedback is vital to applications where multiple actuators must travel in sync. 

      *Product is now manufactured in silver

      To move between two and four actuators in synchronous we recommend our dedicated control board, the FCB-1.  

      CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino. 

      Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies 

      • Works perfectly with Control board FCB-1 for the ultimate Actuator control, to give you complete actuator control including adjusting limits, speed, and time functions. 
      FA-BH36-224-12-(S) FA-BH36-224-24-(S)
      Push/Pull Force 224 lbs. 224 lbs.
      Static Force 268 lbs. 268 lbs.
      Speed at full load - Use FCB-1 for speed adjustment 0.157”/sec 0.157”/sec
      Gear Ratio 100:1 100:1
      Voltage 12V 24V
      Max Current at full load 3A 3A
      Duty Cycle 25% at 100% load. Max. 5 mins continuous use
      Operating Temp. Range -4°F to 149°F (-20°C to 65°C)
      IP Rating 66 
      No Load Noise Level 50-70 dB
      Diameter 1.42" (36mm)
      Outer Housing Material Aluminum 
      Expansion Rod Material Stainless Steel 304
      Limit Switch  Built-In non-adjustable unless you use FCB-1 controller
      Feedback Hall Effect Sensor
      Hall sensor Pulses per inch of travel 1,828 (72 pulses per mm of travel)
      Number of Hall Magnet 3PPR
      Pitch of leadscrew P2.5*2T
      Revolutions per inch stroke  0.2" (5.08mm)  Stroke per Revolution of the Leadscrew. (5 revolutions per Inch of travel)
      Hall sensor pulses per revolution of Leadscrew 360PPR
      Feedback Voltage 5V
      Synchronous Capability Yes, with our Sync Control Board or a  Microcontroller
      Cable Length 1.5 feet
      Wire Gauge Motor wires 18. Sensor wires 20
      Brackets MB36 , MB36C, MB36SM
      Stroke Length Retracted Length Extended Length Weight (lb) STEP File
      6" 16.34" 22.26" 2.4 FA-BH36-224-(F)-6
      8" 18.30" 26.20" 2.6 FA-BH36-224-(F)-8
      10" 20.27" 30.27" FA-BH36-224-(F)-10
      12" 23.42" 35.25" 3.15 FA-BH36-224-(F)-12
      14" 25.24" 39.19" 3.4 FA-BH36-224-(F)-14
      18" 30.15" 48.24" 3.95 FA-BH36-224-(F)-18
      22" 34.45" 56.12" 4.05 FA-BH36-224-(F)-22
      24" 36.45" 58.12" 4.25 FA-BH36-224-(F)-24
      Technical Drawings

      actuator dimensions

      Curve Graphs
      36 Cal. Actuator Speed vs load graph
      Product Video

      Bullet Series 36 Cal. review

      Comparison Video

      Bullet Series 36 cal. vs 50 cal.

      3D Model Downloads (.STEP)

      Wiring Diagram

      Click here to view our wiring diagram generator to help you set up your actuator system

      Wiring Diagram Generator

      Compatible Brackets

      Frequently Bought Together

      Total Price: