|
These units are 400 lbs force with Aluminum shaft, and a tough plastic Case. 2 wire configuration for ease of use, 12vdc operation, fixed limit switches, very quiet.
Use MB3 mounting brackets for these style actuators
|
Input |
12VDC |
|
Load Capacity |
400 lbs (Push and pull) 400lbs static |
|
Speed |
Approx 1/2" per sec (no load) 2/5" per sec loaded |
|
Stroke Length |
Standard stroke sizes 3" 6" 9" 12" 18" 24" 30" |
|
Mounting |
Clevis on fixed end, uses MB3 brackets on both ends |
|
Limit Switch |
Build-in not movable |
|
Duty Cycle |
20% |
|
Current Draw |
Up to 10 amps at full load |
|
Inner Tube |
Aluminium Alloy |
|
IP Grade |
IP43 |
|
Operation Temperature |
-26degs C ~ 65degs C |
|
Safety Certificate |
CE Certificate |
Hole to Hole dimensions:
|
Stroke Length |
Closed Length |
Extended Length |
|
3” |
9.88” |
12.88” |
|
6” |
12.88” |
18.88” |
|
9” |
15.88” |
24.88" |
|
12” |
18.88" |
30.88” |
|
18” |
24.88” |
42.88” |
Dimensions
This model actuator may come with a custom connector. Removing the connector will expose the two wires which you can connect to your remote control unit or switch.
|
