SMT Test Socket - TQFP-48 Breakout
This test socket is good for any QFP-48 in a 7mm square body. Simply open the latch, place the chip in carefully and then close the top over it. The chip is held securely against gold Fingers in the socket.
The socket is soldered onto a pair of PCBs that turn it into, essentially, a 48 pin DIP with 0.6" spacing that can be breadboarded fairly easily.
* PCB dimension: 2.4" x 1.4"
* Fits TQFP-48 with 7mm body
* Broken out into 0.6" wide 48 pin breadboard spacing