Bullet Series 36 Cal. Linear Actuators
Bullet Series 36 Cal. Linear Actuators
-Tech Drawing
Description
The Bullet Series 36 Cal. Linear Actuator was developed to have a slim in-line motor design. Includes built-in hall effect sensor, which allows for synchronization, position and speed control. The hall effect feedback is vital to applications where multiple actuators must travel in sync.
To move between two and four actuators in synchronous we recommend our dedicated control board, the FA-SYNC-X. A video tutorial of how to use this product is available here.
CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.
Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies
Available in 12V and 24V and various stroke lengths from 6 to 24 inches.
Specifications
| FA-BH36-224-12-(S) | FA-BH36-224-24-(S) | |
| Push/Pull Force | 224 lbs. | 224 lbs. |
| Static Force | 268 lbs. | 268 lbs. |
| Speed at full load | 0.157”/sec | 0.157”/sec |
| Gear Ratio | 100:1 | 100:1 |
| Voltage | 12V | 24V |
| Max Current at full load | 3A | 3A |
| Duty Cycle | 25% at 100% load, 50% at 25% of load , absolute max. 5 mins continuous use | |
| Operating Temp. Range | -4°F to 149°F (-20°C to 65°C) | |
| Protection Class | IP66 | |
| No Load Noise Level | 50-70 dB | |
| Diameter | 1.42" (36mm) | |
| Outer Housing Material | Aluminum | |
| Expansion Rod Material | Stainless Steel 304 | |
| Limit Switch | Built-In non-adjustable | |
| Feedback | Hall Effect Sensor | |
| Hall sensor Pulses per inch of travel | 1,828 (72 pulses per mm of travel) | |
| Number of Hall Magnet | 3PPR | |
| Pitch of leadscrew | P2.5*2T | |
| Revolutions per inch stroke | 0.2" (5.08mm) Stroke per Revolution of the Leadscrew. (5 revolutions per Inch of travel) | |
| Hall sensor pulses per revolution of Leadscrew | 360PPR | |
| Feedback Voltage | 5V | |
| Cable Length | 1.5 feet | |
| Brackets | MB36 , MB36C, MB36SM | |
| Stroke Length | Retracted Length | Extended Length | Weight (lb) | STEP File |
| 6" | 16.34" | 22.26" | 2.4 | FA-BH36-224-(F)-6 |
| 8" | 18.30" | 26.20" | 2.6 | FA-BH36-224-(F)-8 |
| 10" | 20.27" | 30.27" | FA-BH36-224-(F)-10 | |
| 12" | 23.42" | 35.25" | 3.15 | FA-BH36-224-(F)-12 |
| 14" | 25.39" | 35.19" | 3.4 | FA-BH36-224-(F)-14 |
| 18" | 30.15" | 48.24" | 3.95 | FA-BH36-224-(F)-18 |
| 22" | 34.45" | 56.12" | 4.05 | FA-BH36-224-(F)-22 |
| 24" | 36.45" | 58.12" | 4.25 | FA-BH36-224-(F)-24 |
Technical Drawings
Curve Graphs
