Bullet Series 50 Cal. Linear Actuators

      Bullet Series 50 Cal. Linear Actuators

      PHP
      Model #
      Voltage
      Force
      Stroke
      Quantity
      qty limit cart limit
      In Stock

      Add 

      Warranty Plus

      Warranty Plus:
      Your product will be replaced (including free shipping) with a new one within 12 months of purchase, even if it is damaged due to improper wiring, incorrect usage, a problem in the electrical installation or any other circumstance.

      Standard Warranty:
      12 month warranty comes with every purchase. Covers malfunctions when it is used within the described conditions/limits.

       +8% 

      Bulk Discount

      Save on your order when purchasing our Actuators in large volumes. Discount will be calculated at checkout.

      Min. Quantity Discount
      11 20 % OFF
      31 25 % OFF
      50 30 % OFF
      200 40 % OFF

      Shipping Cost Estimator

      Note: You must have items in your cart already before you can see the estimated costs to ship your cart. This shipping tool will estimate the total shipping cost for your entire basket.

      Description

      The Bullet Series 50 Cal. Linear Actuator was developed to have a slim, in-line motor design. These units have built-in hall effect sensors, which allow for synchronization, position, and speed control. The Hall effect feedback is vital to applications where multiple actuators must travel in sync. Popular within robotics, manufacturing, marine, off-road vehicles, and home automation.

      *674 lbs will no longer be available

      *Product is now manufactured in silver

      To synchronous 2 or more actuators together to run at exactly the same speed, we recommend our Control board FCB-1 for the ultimate Actuator control.  This gives you complete actuator control including adjusting limits, speed, and even a series of timer functions to be able to time when an Actuator opens and closes.

      CAD models of this actuator can be found under Resources/3D Files. For further information review the specifications and technical drawings (below) or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino. 

      Tech Note: Hall Effect Sensors were modified between 2020 and 2021 production runs; previous HE Sensors had 12 magnet pairs, the current HE Sensor has 3 pairs. Please reference our Hall Effect Sensor Tutorial for PLC programming.

      Accessories sold separately include: Remote Controls - Switches - Micro-Controllers - Power Supplies 


      Specifications
      FA-BH50-500-12-(S) FA-BH50-500-24-(S) FA-BH50-674-12-(S) FA-BH50-674-24-(S) FA-BH50-1124-12-(S) FA-BH50-1124-24-(S)
      Push/Pull Force 500 lbs. 500 lbs. 674 lbs. 674 lbs. 1124 lbs. 1124 lbs.
      Static Force 800 lbs. 800 lbs. 808 lbs. 808 lbs. 1348 lbs 1348 lbs.
      Speed at full load ("/s) 0.48 0.48 0.145 0.145 0.08 0.08
      Gear Ratio 51:1 51:1 50:1 50:1 100:1 100:1
      Voltage 12V 24V 12V 24V 12V 24V
      Max Current at full load 10A 8A 5A 3A 5A 3A
      Number of Hall magnet 3PPR 3PPR 3PPR 3PPR 3PPR 3PPR
      Pitch of Leadscrew P4.0*1T P4.0*1T P2.5*2T P2.5*2T P2.5*1T P2.51T
      Revolutions per inch stroke (25.4mm) 6.35  6.35 5.08 5.08 10.16 10.16
      Hall Sensor pulses per revolution 153PPR 129PPR 417PPR 417PPR 417PPR 417PPR
      Duty Cycle 10% 1 min on and 10 min rest at full load
      Operating Temp. Range -4°F to 149°F (-20°C to 65°C)
      IP Rating 66  
      No Load Noise Level 50-70 dB
      Diameter 1.97" (50mm)
      Outer Housing Material Aluminum 6061
      Expansion Rod Material Stainless Steel 304
      Limit Switch  Built-In non-adjustable - For adjustable limit switch try our new Adjustable Limit Switch Actuators 
      Feedback Hall Effect Sensor 
      Hall Sensor Pulses per inch of travel

      500 lbs: 971 p/in
      674 lbs: 2,115 p/in
      1124 lbs: 4,235 p/in

      Hall Sensor Pulses per mm

      500 lbs: 153 p/mm
      674 lbs: 333 p/mm
      1124 lbs: 667 p/mm

      Feedback Voltage

      5V

      Synchronous Capability

       Yes, with our Sync Control Board or a  Microcontroller
      Cable Length 1.5 feet
      Wire Gauge Motor wires 18. Sensor wires 20
      Brackets MB50 , MB50C or MB50U

      Stroke Length Retracted Length Extended Length Weight (lb) STEP File
      6" 18.21" 24.07" 4.85 FA-BH50-(F)-(V)-6
      8" 20.18" 28.01" 5.25 FA-BH50-(F)-(V)-8
      10" 22.14" 31.95" 5.6 FA-BH50-(F)-(V)-10
      12" 24.11" 35.88" 5.95 FA-BH50-(F)-(V)-12
      18" 31.99" 49.66" 7.25 FA-BH50-(F)-(V)-18
      24" 37.89" 61.47" 8.15 FA-BH50-(F)-(V)-24
      30" 45.77" 75.25" 9.45 FA-BH50-(F)-(V)-30
      36" 51.67" 87.07" 11.1 FA-BH50-(F)-(V)-36
      40" 55.61" 94.94" 11.35 FA-BH50-(F)-(V)-40
      Technical Drawings

      Curve Graphs

      Product Video

      Bullet Series 50 cal. Review


      Comparison Video

      Bullet Series 50 cal. vs 30 cal.


      3D Model Downloads (.STEP)

      674lb and 1124lb Force

      Wiring Diagram

      Click here to view our wiring diagram generator to help you set up your actuator system

      Wiring Diagram Generator
      Downloads

      Compatible Brackets

      Frequently Bought Together

      Total Price: