The Bullet Series 35 Cal. Linear Actuator was developed to have a slim in-line motor design. They are light weight and are fitted with high quality Japanese motors to ensure a long life span and low operating noise with an IP66 rating.
These Actuators come with an integrated force sensor (in the form of an over-current protection circuit), this means if they bump into something or when they get to the end of their stroke they automatically stop moving until you either change direction or remove the load. Please be aware that this model does not have internal limit switches - For adjustable limit-switch linear actuators try our new Adjustable limit switch Actuators. The built-in over-current protection system is a great new safety mechanism and offers many applications from Skylight Window openers to Automotive motion control where space is tight.
For further information review the specifications and technical drawings down below or visit our tutorials page for instructions on how to use this actuator with switches, remotes, speed controllers, and Arduino.
|Push/Pull Force||22 lbs.||90 lbs.||180 lbs.||270 lbs.|
|Static Force||30 lbs.||135 lbs.||350 lbs.||400 lbs.|
|Speed at no load||1.3”/sec||0.7”/sec||0.45”/sec||0.26”/sec|
|Speed at full load||1.1"/sec||0.5"/sec||0.27"/sec||0.17"/sec|
|Max Current||3.8 amps|
|Duty Cycle||25% if operating above 65°C (150°F) or 100% if operating below 65°C (150°F)|
|Temperature Range||-20°C ~ 60°C|
|Noise Level||50-60 dB|
|Backlash||0.01 ~ 0.03"|
|Over Current Circuit Protection||Built-in|
|Circuit Breaking Current||4.5 amps|
|Circuit Breaking Response Time||0.1 ~ 0.5 seconds|
|Outer Housing Material||6063 Aluminum|
|Rod Material||304 Stainless Steel|
|Material of nut||Plastic|
|Cable Length||5 feet|
|Stroke Length||Retracted Length||Extended Length||Weight||Step File|
Click here to view our wiring diagram generator to help you set up your actuator systemWiring Diagram Generator